Skip to content

Fleet tools

Fleet Recall Roundup

National Highway Traffic Safety Administration (NHTSA) safety recalls since 2010 for the vehicles and equipment public fleets run, plus Consumer Product Safety Commission (CPSC) recalls of the mowers, utility vehicles, tractors and power equipment public agencies use. Sort and filter by fleet class, make, model year and component, or open the list up to every vehicle.

Sources: NHTSA recall data and CPSC recalls · Updated nightly · Last refresh Nov. 20, 2026

This week’s top recalls for public fleets

Recalls NHTSA and CPSC posted Nov. 9, 2026 to Nov. 15, 2026, ranked by drive, parking and stop-using warnings, then by the kind of vehicle (emergency and passenger vehicles first) weighed against how many are affected. Updated every Monday.

  1. CPSC says stop using · Grounds and off-road equipment · 2,960 units Cummins Cummins Onan P5000iDF EFI Dual Fuel Portable Generators Generators and light towers · Nov. 12, 2026
  2. Fire apparatus · 937 vehicles Rosenbauer Avenger, Commander, Warrior Electrical system · Nov. 9, 2026
  3. Transit and coach bus · 1,182 vehicles New Flyer XD35, XD40, XD60 and 1 more Fuel system, diesel · Nov. 10, 2026
  4. Fleet SUV and car / Pickup, van and work truck · 314,029 vehicles Toyota Corolla, Tundra Air bags · Nov. 12, 2026
  5. Pickup, van and work truck · 62,490 vehicles Toyota Tundra Engine and engine cooling · Nov. 12, 2026

285 recalls · since 2010

  1. Nov. 13, 2026 Altec AT Series Utility and aerial 2024–2026 Suspension: rear: springs: leaf spring assembly: u-bolt, leaf spring to axle 161 units 26V753000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2024-2026 AT Series vehicles. The U-bolt securing the rear suspension may not have been properly tightened after rear suspension modification work was completed.

    Consequence

    An incorrectly tightened U-bolt may loosen and allow the rear axle to loosen or detach, increasing the risk of a crash.

    Remedy

    Altec will instruct owners to inspect the suspension for loose U-bolts. Depending on the inspection results, the U-bolts will be tightened or replaced as necessary. If any damage is found, the suspension will be repaired or replaced at an Altec service center. Repairs will be performed free of charge. Owner notification letters are expected to be mailed January 8, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3386.

    Altec Industries, Inc. · maker’s number CSN-3386 · NHTSA page for the 2026 Altec AT Series ↗

    Related on MPF: Altec Industries in the Solutions Guide

  2. Nov. 13, 2026 Altec AM Series Aerial Device, AN Series Aerial Device Utility and aerial 2025–2026 Equipment: mechanical: containment: valve 1,100 units 26V752000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device, and AN Series Aerial Device vehicles. The activation handle for the platform stow valve at the lower controls may have been assembled without thread locking compound, and can loosen and separate from the control valve.

    Consequence

    A separated activation handle can allow the control valve to eject hot oil, increasing the risk of injury.

    Remedy

    Altec will instruct owners to inspect the platform rotate valve for an affected lot number. If the valve is from the affected lot, owners can order a kit and replace the affected valve or schedule service with Altec, free of charge. Owner notification letters are expected to be mailed January 8, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3385.

    Altec Industries, Inc. · maker’s number CSN-3385 · NHTSA page for the 2026 Altec AN Series Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  3. Nov. 6, 2026 Altec AA Series Aerial Device, AM Series Aerial Device, AN Series Aerial Device Utility and aerial 2025–2026 Equipment: mechanical: boom/crane/ladder: critical fasteners 3,083 units 26V738000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AN Series, AA Series, and AM Series Aerial Device vehicles. The retention hardware for the rear mounting pin on the jib tilt cylinder may be improperly tightened.

    Consequence

    Loose hardware can fall out and release the cylinder pin, causing the jib to swing freely and the winch line to drop up to 10 feet, which increases the risk of injury.

    Remedy

    Altec will provide instructions on how to inspect and properly tighten the retention hardware, free of charge. Owner notification letters are expected to be mailed January 4, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3381.

    Altec Industries, Inc. · maker’s number CSN-3381 · NHTSA page for the 2026 Altec AA Series Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  4. Oct. 9, 2026 Altec AC Series Crane, Aerial Device, Digger Derrick, Service Body Utility and aerial 2026 Back over prevention: sensing system: camera 1,053 units 26V666000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2026 Service Body, Aerial Device, Digger Derrick, and AC Series Crane vehicles. These vehicles may have been manufactured without a rearview camera installed.

    Consequence

    A missing rearview camera can reduce the driver's view behind the vehicle, increasing the risk of a crash.

    Remedy

    Altec will install a camera or provide a camera kit to owners as necessary, free of charge. Owner notification letters will be mailed December 4, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3376.

    Altec Industries, Inc. · maker’s number CSN-3376 · NHTSA page for the 2026 Altec Service Body ↗

    Related on MPF: Altec Industries in the Solutions Guide

  5. Oct. 9, 2026 Altec Digger Derrick Utility and aerial 2023–2024 Structure: body: bumpers 45 units 26V665000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2023-2024 Digger Derrick vehicles. The front winch bumper may be secured with incorrect bolts, which can cause the bumper to detach from the vehicle.

    Consequence

    A front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.

    Remedy

    Altec will install the correct bolts on the front bumper, free of charge. Owner notification letters will be mailed December 4, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3375.

    Altec Industries, Inc. · maker’s number CSN-3375 · NHTSA page for the 2024 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  6. Oct. 2, 2026 Terex C4000, C6000, General 65 Utility and aerial 2020–2022 Trailer hitches 100 units 26V639000

    Defect

    Ring Power Corporation (Ring Power) is recalling certain 2020 Terex General 65, 2020-2021 C6000, 2020-2022 C4000, and TC55 vehicles. The incorrect pintle hitch may have been installed without reinforced bracing, resulting in the rear bumper hitch plate bending.

    Consequence

    The pintle hitch may fail, causing a loss of trailer control and increasing the risk of a crash.

    Remedy

    Ring Power will inspect, replace the pintle hitch, and install bracing. Damaged bumpers will be replaced. All repairs will be performed free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Ring Power's customer service at 904-613-0035. Ring Power's number for this recall is 23402.

    Ring Power Corporation · maker’s number 23402 · NHTSA page for the 2022 Terex C4000 ↗

  7. Oct. 2, 2026 Altec A-Class, AA Series Aerial Device, AM Series Aerial Device, AN Series Aerial Device, Digger Derrick Utility and aerial 2020–2026 Structure: body: step/ladder 6,780 units 26V637000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2020-2026 AA Series Aerial Device, 2021-2026 AN Series Aerial Device, 2023-2026 AM Series Aerial Device, and 2024-2026 Digger Derrick, and 2024-2025 A-Class vehicles. The turntable mounted platform access step may have been improperly welded between the step tube and mounting plate, and allow the step to separate from the vehicle.

    Consequence

    A step that separates or becomes unstable while in use, increases the risk of a fall or injury.

    Remedy

    Altec will replace the steps, free of charge. Owner notification letters are expected to be mailed November 27, 2026. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3374.

    Altec Industries, Inc. · maker’s number CSN-3374 · NHTSA page for the 2026 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  8. Sept. 24, 2026 Altec Digger Derrick, TA Series Aerial Device Utility and aerial 2021–2026 Electrical system: wiring 143 units 26V617000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2021-2026 Altec Digger Derrick, and 2023-2025 Altec TA Series Aerial Device vehicles. Improper wiring may prevent the boom stow auto-neutral feature from engaging, which can allow the truck to be driven while the boom is still elevated.

    Consequence

    When the vehicle is moved or driven with the boom out of stow, the vehicle could exceed the recorded travel height, increasing the risk of a crash.

    Remedy

    Altec will correct the wiring in the power distribution module to enable the boom stow auto-neutral functionality, free of charge. Owner notification letters are expected to be mailed November 20, 2026. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3370.

    Altec Industries, Inc. · maker’s number CSN-3370 · NHTSA page for the 2026 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  9. Aug. 27, 2026 Altec Service Body Utility and aerial 2021–2023 Equipment: emergency: siren/lighting/strobes 280 units 26V551000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2021-2023 Service Body vehicles. Water can leak into the strobe lights, which may cause an electrical short-circuit.

    Consequence

    An electrical short circuit can increase the risk of a fire.

    Remedy

    Altec will provide instructions to inspect the light assembly for moisture and install a new fuse. If moisture is found or the light is inoperative, a light replacement kit will be installed, free of charge. Owner notification letters were mailed October 23, 2026. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3360. This recall is an expansion of previous NHTSA recall number 23V357.

    Altec Industries, Inc. · maker’s number CSN-3360 · owners notified Oct. 23, 2026 · NHTSA page for the 2023 Altec Service Body ↗

    Related on MPF: Altec Industries in the Solutions Guide

  10. Aug. 21, 2026 Altec AA Series Aerial Device, AM Series Aerial Device, Digger Derrick Utility and aerial 2022–2026 Forward collision avoidance: automatic emergency braking 55 units 26V541000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2019-2026 AN Series, 2023 AA Series, 2022-2026 Digger Derrick, and 2025 AM Series vehicles. The Bendix automatic braking system was not recalibrated after relocating the front radar box.

    Consequence

    An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.

    Remedy

    Altec will update the collision mitigation system with the revised the parameters, recalibrate, and test the system, free of charge. Owner notification letters were mailed October 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3356.

    Altec Industries, Inc. · maker’s number CSN-3356 · owners notified Oct. 16, 2026 · NHTSA page for the 2026 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  11. Aug. 17, 2026 Terex C4000, C5000, C6000, General 65 Utility and aerial 2019–2026 Equipment 73 units 26V534000

    Defect

    Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.

    Consequence

    Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.

    Remedy

    Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer service at 1-904-737-7730. Ring Power's number for this recall is UTC0001.

    Ring Power Corporation · maker’s number UTC0001 · NHTSA page for the 2026 Terex C5000 ↗

  12. July 17, 2026 Altec AT Series Utility and aerial 2024–2026 Equipment: mechanical: boom/crane/ladder: critical fasteners 309 units 26V463000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2024-2026 AT Series vehicles. The turntable rotation bearing fasteners may not have been heat treated properly.

    Consequence

    A fastener that has not been heat treated could fail, resulting in separation of the pedestal and turntable, increasing the risk of injury.

    Remedy

    Altec will instruct owners to inspect the lot number on the fasteners and, if necessary, order a rotation bolt kit to replace the fasteners, or schedule service with Altec, free of charge. Owner notification letters were mailed September 11, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3347.

    Altec Industries, Inc. · maker’s number CSN-3347 · owners notified Sept. 11, 2026 · NHTSA page for the 2026 Altec AT Series ↗

    Related on MPF: Altec Industries in the Solutions Guide

  13. July 16, 2026 Altec AP Series Utility and aerial 2013–2025 Electrical system: wiring: switches/knobs/buttons 884 units 26V457000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2013-2025 AP45A trucks. The boom stow switch wire in the cargo storage area may become damaged, which can result in a short circuit, causing the wire to overheat.

    Consequence

    An overheated wire can ignite flammable material in the cargo area, increasing the risk of fire.

    Remedy

    Altec will instruct owners to inspect their vehicle and if the wire is not protected, order a kit that includes a bolt on guard to protect the wires, free of charge. Letters informing owners of the safety risk were mailed September 11, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3349.

    Altec Industries, Inc. · maker’s number CSN-3349 · owners notified Sept. 11, 2026 · NHTSA page for the 2025 Altec AP Series ↗

    Related on MPF: Altec Industries in the Solutions Guide

  14. July 2, 2026 Altec Service Body Utility and aerial 2022–2026 Electrical system: propulsion system: inverter 277 units 26V429000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2022-2026 Service Body vehicles. The inverter output AC wiring may be routed too tightly in the electrical receptacle enclosure and become damaged, possibly resulting in a short circuit.

    Consequence

    A short may cause the inverter AC wiring to overheat, increasing the risk of a fire.

    Remedy

    Altec will install an electrical receptacle enclosure extension, free of charge. Owner notification letters are expected to be mailed August 28, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3340.

    Altec Industries, Inc. · maker’s number CSN-3340 · owners notified Aug. 25, 2026 · NHTSA page for the 2026 Altec Service Body ↗

    Related on MPF: Altec Industries in the Solutions Guide

  15. June 26, 2026 Altec Digger Derrick Utility and aerial 2023–2025 Equipment: mechanical: carrier/rack 6 units 26V409000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Digger Derrick vehicles. The vertical center of gravity with poles in the pole rack was not calculated properly, resulting in an incorrect pole rack capacity rating.

    Consequence

    While using the pole rack at full capacity, an incorrect high vertical center of gravity during braking and cornering may lead to a loss of vehicle control, increasing the risk of a crash.

    Remedy

    Altec will provide owners with a safety alert placard, free of charge. Owner notification letters are expected to be mailed August 21, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3335.

    Altec Industries, Inc. · maker’s number CSN-3335 · owners notified Aug. 18, 2026 · NHTSA page for the 2025 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  16. June 12, 2026 Altec AT Series Utility and aerial 2014–2026 Power train: automatic transmission: park/neutral start interlock switch 4,923 units 26V386000

    Defect

    Altec industries, Inc. is recalling certain 2014-2026 AT Series Aerial Device vehicles. The transmission park interlock may be missing, allowing the aerial device to operate while the chassis is not in park.

    Consequence

    An aerial device that operates while the vehicle is in gear or neutral can cause unexpected vehicle movement and increase the risk of injury.

    Remedy

    Altec will update the electrical harness and control modules, free of charge. Owner notification letters were mailed August 7, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3331.

    Altec Industries, Inc. · maker’s number CSN-3331 · owners notified Aug. 7, 2026 · NHTSA page for the 2026 Altec AT Series ↗

    Related on MPF: Altec Industries in the Solutions Guide

  17. June 11, 2026 Altec AC Series Crane Utility and aerial 2024–2026 Equipment: mechanical: boom/crane/ladder: critical fasteners 14 units 26V384000

    Defect

    Altec Industries (Altec) is recalling certain 2024-2026 AC Series Crane vehicles. The inside joints between the side plates and the base plates of the 26-foot insulating personnel jib (IJ26) may be missing welds.

    Consequence

    Missing welds can lead to platform joint failure due to fatigue or overload, resulting in the platform falling from the boom tip, increasing the risk of injury.

    Remedy

    Altec will advise owners to inspect the IJ26 jib for missing welds. If the welds are missing, the jib should be taken out of service immediately. Altec will add the missing welds or provide a repair procedure and kit, free of charge. Owner notification letters were mailed July 23, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB-3330.

    Altec Industries, Inc. · maker’s number MAB-3330 · owners notified July 23, 2026 · NHTSA page for the 2026 Altec AC Series Crane ↗

    Related on MPF: Altec Industries in the Solutions Guide

  18. May 15, 2026 Altec AA Series Aerial Device, AM Series Aerial Device, AN Series Aerial Device, AT Series, L Series Aerial Device, LR Series Aerial Device and 1 more Utility and aerial 2020–2026 Equipment: mechanical: boom/crane/ladder: controls/control wiring 213 units 26V310000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.

    Consequence

    Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.

    Remedy

    Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Owner notification letters were mailed October 12, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.

    Altec Industries, Inc. · maker’s number CSN-3322 · owners notified Oct. 12, 2026 · NHTSA page for the 2026 Altec TA Series Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  19. April 17, 2026 Altec Aerial Device, Digger Derrick Utility and aerial 2025–2026 Forward collision avoidance: sensing system: radar 36 units 26V247000

    Defect

    Altec Industries, Inc. is recalling certain 2025-2026 Digger Derrick and 2025-2026 Aerial Device vehicles. The front end radar was improperly installed, which may result in improper operation of the Adaptive Cruise Control (ACC) and Active Brake Assist (ABA).

    Consequence

    While driving, the brakes may activate unexpectedly without the driver's input, increasing the risk of a crash.

    Remedy

    Altec will inform the owners to inspect the front end radar installation and if installed incorrectly, instruct owners to take the vehicle to an OEM Chassis dealer to have the radar remounted and calibrated, free of charge. Owner notification letters were mailed June 12, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3309.

    Altec Industries, Inc. · maker’s number CSN-3309 · owners notified June 12, 2026 · NHTSA page for the 2026 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  20. April 16, 2026 Altec AM Series Aerial Device Utility and aerial 2025–2026 Equipment: mechanical: boom/crane/ladder: controls/control wiring 40 units 26V243000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device vehicles. The emergency stop switch located at the turntable is inoperative when the upper controls interlock is active and allows the upper and lower controls to remain powered when the emergency stop is depressed.

    Consequence

    An inoperative emergency stop switch increases the risk of injury.

    Remedy

    Altec will notify owners to inspect for the presence of an adapter harness. If installed, the owner will be instructed to notify Altec, and no further action is needed. If the harness is not installed, Altec will provide a kit to complete the repair, free of charge. Owner notification letters were mailed June 9, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3307.

    Altec Industries, Inc. · maker’s number CSN-3307 · owners notified June 9, 2026 · NHTSA page for the 2026 Altec AM Series Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  21. March 20, 2026 Altec AC Series Crane, Digger Derrick Utility and aerial 2025 Exterior lighting 134 units 26V170000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2025 AC Series Crane and DT Series Digger Derrick vehicles. The harness intended to prevent Altec installed lighting from overloading the chassis lighting circuit was not installed, which may result in a loss of power to the body lighting or trailer lights.

    Consequence

    Loss of body lighting or trailer lights increases the risk of a crash.

    Remedy

    Altec will notify owners to inspect their vehicle for the harness. If the harness is missing, a repair kit will be provided, free of charge. Owner notification letters were mailed May 15, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3295.

    Altec Industries, Inc. · maker’s number CSN-3295 · owners notified May 15, 2026 · NHTSA page for the 2025 Altec AC Series Crane ↗

    Related on MPF: Altec Industries in the Solutions Guide

  22. March 19, 2026 Terex C4000, C5000, C6000, General 65, General 80, General 95 Utility and aerial 2019–2026 Equipment 2,303 units 26V167000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.

    Consequence

    Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.

    Remedy

    Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN737.

    Terex South Dakota, Inc. · maker’s number SN 737 · owners notified June 2, 2026 · NHTSA page for the 2026 Terex General 80 ↗

  23. March 13, 2026 Altec Aerial Device, Digger Derrick, Pressure Digger, Service Body, Spray Truck Utility and aerial 2023–2026 Equipment: other: labels 10,875 units 26V150000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck, and Digger Derrick vehicles. The low tire pressure rating printed on the final stage certification label is incorrect.

    Consequence

    An incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.

    Remedy

    Altec will inspect and replace the incorrect certification label, free of charge. Owner notification letters were mailed May 11, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3294.

    Altec Industries, Inc. · maker’s number CSN-3294 · owners notified May 11, 2026 · NHTSA page for the 2026 Altec Service Body ↗

    Related on MPF: Altec Industries in the Solutions Guide

  24. Feb. 6, 2026 Altec AM Series Aerial Device, Digger Derrick Utility and aerial 2021–2025 Electrical system: wiring: power distribution module/ipdm 57 units 26V071000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2021-2025 Digger Derrick and 2021-2025 AM Series Aerial Device vehicles. The chassis engine may start unintentionally due to a missing diode in the Altec power distribution module.

    Consequence

    An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.

    Remedy

    Altec will provide instructions to inspect the power distribution module for a diode, and provide a repair kit as necessary, free of charge. Owner notification letters were mailed March 27, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3281.

    Altec Industries, Inc. · maker’s number CSN-3281 · owners notified March 27, 2026 · NHTSA page for the 2025 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  25. Jan. 12, 2026 Terex HR40, HR46, Lt-Series, LTM40, SCM55, Tl-Series Utility and aerial 2025 Equipment: mechanical: boom/crane/ladder: motor/hydraulic pump 88 units 26V006000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2025 TL-Series, LT-Series, LTM40, HR40, HR46, and SCM55 areal device vehicles. The control valve may have been assembled with an incorrect plug, causing the hydraulic equipment to overheat.

    Consequence

    Touching parts of the overheated hydraulic equipment can increase the risk of burn injuries.

    Remedy

    Dealers will inspect and repair the control valve as necessary, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN735.

    Terex South Dakota, Inc. · maker’s number SN735 · owners notified Jan. 23, 2026 · NHTSA page for the 2025 Terex Tl-Series ↗

Recall details are NHTSA’s and CPSC’s own text. Fleet classes are MPF’s grouping of NHTSA makes and models; police variants are often filed under the civilian model name, so also search the civilian model. Check every vehicle by VIN at nhtsa.gov/recalls.