Skip to content

Fleet tools

Fleet Recall Roundup

National Highway Traffic Safety Administration (NHTSA) safety recalls since 2010 for the vehicles and equipment public fleets run, plus Consumer Product Safety Commission (CPSC) recalls of the mowers, utility vehicles, tractors and power equipment public agencies use. Sort and filter by fleet class, make, model year and component, or open the list up to every vehicle.

Sources: NHTSA recall data and CPSC recalls · Updated nightly · Last refresh Nov. 20, 2026

This week’s top recalls for public fleets

Recalls NHTSA and CPSC posted Nov. 9, 2026 to Nov. 15, 2026, ranked by drive, parking and stop-using warnings, then by the kind of vehicle (emergency and passenger vehicles first) weighed against how many are affected. Updated every Monday.

  1. CPSC says stop using · Grounds and off-road equipment · 2,960 units Cummins Cummins Onan P5000iDF EFI Dual Fuel Portable Generators Generators and light towers · Nov. 12, 2026
  2. Fire apparatus · 937 vehicles Rosenbauer Avenger, Commander, Warrior Electrical system · Nov. 9, 2026
  3. Transit and coach bus · 1,182 vehicles New Flyer XD35, XD40, XD60 and 1 more Fuel system, diesel · Nov. 10, 2026
  4. Fleet SUV and car / Pickup, van and work truck · 314,029 vehicles Toyota Corolla, Tundra Air bags · Nov. 12, 2026
  5. Pickup, van and work truck · 62,490 vehicles Toyota Tundra Engine and engine cooling · Nov. 12, 2026

285 recalls · since 2010

  1. Jan. 12, 2023 Altec Digger Derrick Utility and aerial 2022 Structure: critical fasteners 45 units 23V003000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2022 DC & DM Series Digger Derrick vehicles. During production, an incorrect bolt may have been used to attach the derrick rotation bearing.

    Consequence

    An incorrect bolt in the derrick rotation bearing may cause the adjacent bolts to be overloaded during operation, which could cause separation of the rotation bearing, and increase the risk of an injury.

    Remedy

    Altec will inspect and if an incorrect bolt is found, replace the bolts affected bearing race, free of charge. Owner notification letters are expected to be mailed March 10, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3045.

    Altec Industries, Inc. · maker’s number CSN 3045 · owners notified Feb. 16, 2023 · NHTSA page for the 2022 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  2. Dec. 2, 2022 Terex C4000, C5000, C6000, C7000, General 65, General 80 and 1 more Utility and aerial 2022 Equipment: mechanical: boom/crane/ladder 431 units 22V893000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, C5000, C6000, C7000, General, and Trans TL vehicles. A seam in the boom structure may have been improperly welded, causing the weld to crack.

    Consequence

    A cracked weld may lead to the boom failing, increasing the risk of an injury.

    Remedy

    Dealers will replace or repair the boom, free of charge. Owner notification letters were mailed on February 8, 2023. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN715.

    Terex South Dakota, Inc. · maker’s number SN715 · owners notified Feb. 8, 2023 · NHTSA page for the 2022 Terex C5000 ↗

  3. Dec. 1, 2022 Terex C4000, Optima TC, XT Pro Utility and aerial 2022 Equipment: mechanical 40 units 22V888000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, Optima TC, and XT Pro outrigger vehicles. The outrigger cylinder may have been machined incorrectly, which can cause the lock valve cartridge seals to fail, allowing the cylinder to drift.

    Consequence

    A drifting cylinder may result in the machine tipping, increasing the risk of injury.

    Remedy

    Dealers will replace the cylinders, free of charge. All affected vehicles were inspected and remedied by December 22, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN714.

    Terex South Dakota, Inc. · maker’s number SN714 · owners notified Dec. 22, 2022 · NHTSA page for the 2022 Terex Optima TC ↗

  4. Oct. 21, 2022 Altec Aerial Device Utility and aerial 2019–2022 Equipment: mechanical: boom/crane/ladder 71 units 22V794000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT41ME aerial devices. The material handling interlocking valve may lose power when the outriggers are not set, allowing the jib winch to be operated while the outriggers are up.

    Consequence

    Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.

    Remedy

    Altec will install a visual indication system to show when the outriggers are set or not set, and provide a new pre-operational inspection placard, free of charge. Owner notification letters are expected to be mailed December 16, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3030.

    Altec Industries, Inc. · maker’s number CSN 3030 · owners notified Dec. 16, 2022 · NHTSA page for the 2022 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  5. Sept. 8, 2022 Terex TL Utility and aerial 2019–2022 Equipment: mechanical: boom/crane/ladder 194 units 22V674000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2019-2022 TL80, TL80/112, and TL100 aerial devices. The welds for the platform leveling cylinder support bosses may crack, which can cause the cylinder support pin to fail and allow the platform to tip.

    Consequence

    A platform that tips during use increases the risk of an injury.

    Remedy

    Dealers will install reinforcement plates to the boom tip platform leveling cylinder bosses, and, all TL80/112 aerial devices will have the hydraulic storage latch for the elevator replaced, free of charge. Owner notification letters were mailed on October 13, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN712.

    Terex South Dakota, Inc. · maker’s number SN712 · owners notified Oct. 13, 2022 · NHTSA page for the 2022 Terex TL ↗

  6. Aug. 10, 2022 Altec Aerial Device Utility and aerial 2015–2022 Equipment: mechanical: boom/crane/ladder 975 units 22V613000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2015-2022 DT65 and DT85 Aerial Devices. The weld between the base boom and the auger stow bracket could crack.

    Consequence

    A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.

    Remedy

    Altec will inspect and repair cracks found in the base boom, free of charge. Owner notification letters were mailed October 7, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3017.

    Altec Industries, Inc. · maker’s number CSN-3017 · owners notified Oct. 7, 2022 · NHTSA page for the 2022 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  7. Aug. 4, 2022 Altec Aerial Device Utility and aerial 2017–2021 Electrical system: wiring: fuses and circuit breakers 594 units 22V577000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.

    Consequence

    A blown fuse can cause an engine stall, increasing the risk of a crash.

    Remedy

    Altec will install a relay, free of charge. Owner notification letters are expected to be mailed September 30, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3015.

    Altec Industries, Inc. · maker’s number CSN 3015; CSN 3097 · owners notified Sept. 30, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  8. Aug. 4, 2022 Terex Advance Front Discharge Mixer Utility and aerial 2022 Engine and engine cooling: engine: engine control module (ecu/ECM) 22 units 22V574000

    Defect

    Terex Advance Mixer, Inc. (Terex) is recalling certain 2022 Front Discharge Mixer Commander vehicles equipped with Cummins diesel engines. The engine control module (ECM) may experience an internal short-circuit, which can result in an unexpected engine shut down.

    Consequence

    An unexpected engine shut down can increase the risk of a crash.

    Remedy

    Cummins will replace the ECM, free of charge. Cummins launched the remedy on September 26, 2022. Owners may contact Terex's customer service at 1-800-678-5961.

    Terex Advance Mixer, Inc. · owners notified Aug. 8, 2022 · NHTSA page for the 2022 Terex Advance Front Discharge Mixer ↗

  9. June 30, 2022 Altec AT200A, AT30-G Utility and aerial 2016–2022 Electrical system 430 units 22V469000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2016-2022 van mounted AT200A and AT30G vehicles. The ground-fault circuit interrupter (GFCI) outlet may not provide adequate circuit protection against an electrical overload condition.

    Consequence

    An overloaded electrical circuit can increase the risk of a fire.

    Remedy

    Altec will install a new GFCI outlet with a circuit-breaker and new wiring, free of charge. Owner notification letters are expected to be mailed August 29, 2022. Owners may contact Altec's customer service at 205-991-7733. Altec's number for this recall is CSN 3008.

    Altec Industries, Inc. · maker’s number CSN 3008 · owners notified Aug. 26, 2022 · NHTSA page for the 2022 Altec AT30-G ↗

    Related on MPF: Altec Industries in the Solutions Guide

  10. May 18, 2022 Altec Digger Derrick Utility and aerial 2016–2022 Equipment: mechanical: boom/crane/ladder: controls/control wiring 477 units 22V349000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2016-2022 E-series & DH-H series Digger Derricks. The relay connectors may have been reattached to the incorrect plug after a stability test was performed. If the connections are not correct, the hydraulic overload protection system will not function.

    Consequence

    A nonfunctional overload protection system may result in the operator unknowingly overloading the system, increasing the risk of injury.

    Remedy

    Altec will inspect and reattach the connectors, if necessary, free of charge. Owner notification letters were mailed on June 29, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 858.

    Altec Industries, Inc. · maker’s number CSN 858 · owners notified June 29, 2022 · NHTSA page for the 2022 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  11. March 31, 2022 Terex XT Pro Utility and aerial 2020–2022 Equipment: mechanical: boom/crane/ladder: critical fasteners 1,359 units 22V213000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2020-2022 XT Pro aerial devices. The pivot points may not have been lubricated during assembly, which can cause the pins to seize and break the pin retainers.

    Consequence

    Pin retainer failure may cause the boom to fall, increasing the risk of an injury.

    Remedy

    Dealers will inspect and lubricate all pivot points, if necessary, free of charge. Owner notification letters are expected to be mailed on April 29, 2022. Owners may Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN710.

    Terex South Dakota, Inc. · maker’s number SN710 · owners notified April 29, 2022 · NHTSA page for the 2022 Terex XT Pro ↗

  12. March 11, 2022 Altec Aerial Device Utility and aerial 2016–2021 Fuel system, diesel: delivery: hoses, lines/piping, and fittings 27,270 units 22V147000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2016-2021 AT and TA aerial devices. The chassis fuel line clamps may not have been secured properly after they were removed to install an aftermarket accessory.

    Consequence

    Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.

    Remedy

    Altec will provide work instructions and a kit to properly secure the fuel line, and repair any damaged fuel line if necessary, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 855.

    Altec Industries, Inc. · maker’s number CSN 855 · owners notified May 6, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  13. March 11, 2022 Altec Aerial Device Utility and aerial 2017–2021 Equipment 46 units 22V146000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.

    Consequence

    Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.

    Remedy

    Altec will install a carbon monoxide detector and safety alert placard, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 864.

    Altec Industries, Inc. · maker’s number CSN 854 · owners notified May 6, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  14. March 8, 2022 Terex OM, Optima HRX, Optima TCX Utility and aerial 2016–2021 Equipment: mechanical: boom/crane/ladder 17 units 22V138000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2016-2021 OM, Optima-HRX, and TCX aerial devices with dual platforms. The upper control stations' emergency stop controls may not stop all boom functions, resulting in unintended boom movement.

    Consequence

    Unintended boom movement increases the risk of injury.

    Remedy

    Dealers will install engine stop/start controls at both control stations, as necessary, and install placards, free of charge. Owner notification letters were mailed on April 13, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN708.

    Terex South Dakota, Inc. · maker’s number SN708 · owners notified April 13, 2022 · NHTSA page for the 2021 Terex Optima HRX ↗

  15. Feb. 9, 2022 Altec Aerial Device Utility and aerial 2019–2021 Equipment: mechanical: boom/crane/ladder: turntable 454 units 22V072000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2019-2021 ATTXX-M/P/S aerial devices. Bolts in the rotation bearing outer-race may have been over-tightened, allowing the bolts to break.

    Consequence

    Broken bolts can cause separation of the pedestal and turntable, increasing the risk of injury.

    Remedy

    Altec will replace the outer-race rotation bolts, free of charge. Owner notification were mailed on March 25, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 849.

    Altec Industries, Inc. · maker’s number CSN 849 · owners notified March 25, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  16. Feb. 9, 2022 Altec Aerial Device, Digger Derrick Utility and aerial 2018–2021 Equipment: mechanical: boom/crane/ladder 167 units 22V071000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2018-2021 DC and DM Series Digger Derricks and AM series Aerial Devices. The unit subbase may develop cracks in the bulkhead plate, which can cause the shear plates to fail.

    Consequence

    Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.

    Remedy

    Altec will inspect the bulkhead plate, and add a reinforcement plate, free of charge. Owner notification letters were mailed on April 8, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 851.

    Altec Industries, Inc. · maker’s number CSN 851 · owners notified April 8, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  17. Feb. 3, 2022 Altec Aerial Device Utility and aerial 2021 Equipment: mechanical: boom/crane/ladder 47 units 22V060000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2021 AH125 aerial devices. When operating the boom positioning control lever, a defective linear potentiometer may cause the boom to move in an unintended direction.

    Consequence

    The boom moving in an unintended direction increases the risk of injury.

    Remedy

    Altec will inspect the linear potentiometer manufacturer date, and replace the potentiometer if necessary, free of charge. Owner notification letters were mailed on March 16, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 847.

    Altec Industries, Inc. · maker’s number CSN 847 · owners notified March 16, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  18. Feb. 3, 2022 Altec Aerial Device Utility and aerial 2017–2021 Equipment: mechanical: boom/crane/ladder: turntable 157 units 22V058000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.

    Consequence

    Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.

    Remedy

    Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on April 4, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 846.

    Altec Industries, Inc. · maker’s number CSN 846 · owners notified April 4, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  19. Dec. 20, 2021 Altec Aerial Device Utility and aerial 2017–2021 Equipment: mechanical: boom/crane/ladder: motor/hydraulic pump 150 units 21V998000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.

    Consequence

    The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.

    Remedy

    Altec will inspect and correct the plumbing as necessary, free of charge. Owner notification letters are expected to be mailed February 18, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 842.

    Altec Industries, Inc. · maker’s number CSN 842 · owners notified Feb. 18, 2022 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  20. Dec. 16, 2021 Terex Advance Front Discharge Mixer Utility and aerial 2016–2022 Fuel system, diesel: fuel injection system: fuel rail 1,016 units 21V981000

    Defect

    Terex Advance Mixer, Inc. (Terex) is recalling certain 2016-2022 Front Discharge Mixer trucks. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak.

    Consequence

    A high pressure fuel leak in the presence of an ignition source can increase the risk of fire.

    Remedy

    Dealers will replace the fuel tubes, and install vibration isolators, free of charge. Owners may contact Terex customer service at 1-800-678-5961.

    Terex Advance Mixer, Inc. · owners notified Dec. 16, 2021 · NHTSA page for the 2022 Terex Advance Front Discharge Mixer ↗

  21. Nov. 15, 2021 Altec Aerial Device Utility and aerial 2012–2016 Structure: frame and members 4,055 units 21V884000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2012-2016 AT200A aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.

    Consequence

    A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.

    Remedy

    Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed January 13, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 840.

    Altec Industries, Inc. · maker’s number CSN 840 · owners notified Jan. 13, 2022 · NHTSA page for the 2016 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  22. Sept. 23, 2021 Altec Aerial Device Utility and aerial 2011–2016 Equipment: mechanical: boom/crane/ladder: turntable 2,115 units 21V736000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2011-2016 AT200A aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.

    Consequence

    A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.

    Remedy

    Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed on October 13, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 836.

    Altec Industries, Inc. · maker’s number CSN 836 · owners notified Oct. 13, 2021 · NHTSA page for the 2016 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  23. Sept. 16, 2021 Altec Aerial Device Utility and aerial 2016–2021 Equipment: mechanical: boom/crane/ladder: turntable 94 units 21V722000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.

    Consequence

    Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.

    Remedy

    Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on November 15, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 833.

    Altec Industries, Inc. · maker’s number CSN 833 · owners notified Nov. 15, 2021 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  24. Sept. 13, 2021 Altec Aerial Device Utility and aerial 2021 Equipment 29 units 21V709000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2021 AM50, 55, and 60E aerial devices. The cylinder rod threads may not have been machined properly, which could result in uncontrollable boom movement.

    Consequence

    Uncontrollable boom movement increases the risk of injury.

    Remedy

    Altec will replace the cylinder, free of charge. Owner notification letters were mailed on September 30, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 834.

    Altec Industries, Inc. · maker’s number MAB 834 · owners notified Sept. 30, 2021 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  25. July 22, 2021 Altec Digger Derrick Utility and aerial 2016–2021 Equipment 878 units 21V559000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2016-2021 DH, D3000, DT65, and DT85 Digger Derricks. The operator may inadvertently move the pole guide joystick with their forearm due to the close proximity between the controls.

    Consequence

    An unintentionally engaged joystick could result in uncontrolled movement of an unbalanced load, increasing the risk of injury.

    Remedy

    Altec will provide a guard kit to install over the pole guide controls, free of charge. Owner notification letters were mailed on September 15, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 829.

    Altec Industries, Inc. · maker’s number CSN 829 · owners notified Sept. 15, 2021 · NHTSA page for the 2021 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

Recall details are NHTSA’s and CPSC’s own text. Fleet classes are MPF’s grouping of NHTSA makes and models; police variants are often filed under the civilian model name, so also search the civilian model. Check every vehicle by VIN at nhtsa.gov/recalls.