Skip to content

Fleet tools

Fleet Recall Roundup

National Highway Traffic Safety Administration (NHTSA) safety recalls since 2010 for the vehicles and equipment public fleets run, plus Consumer Product Safety Commission (CPSC) recalls of the mowers, utility vehicles, tractors and power equipment public agencies use. Sort and filter by fleet class, make, model year and component, or open the list up to every vehicle.

Sources: NHTSA recall data and CPSC recalls · Updated nightly · Last refresh Nov. 20, 2026

This week’s top recalls for public fleets

Recalls NHTSA and CPSC posted Nov. 9, 2026 to Nov. 15, 2026, ranked by drive, parking and stop-using warnings, then by the kind of vehicle (emergency and passenger vehicles first) weighed against how many are affected. Updated every Monday.

  1. CPSC says stop using · Grounds and off-road equipment · 2,960 units Cummins Cummins Onan P5000iDF EFI Dual Fuel Portable Generators Generators and light towers · Nov. 12, 2026
  2. Fire apparatus · 937 vehicles Rosenbauer Avenger, Commander, Warrior Electrical system · Nov. 9, 2026
  3. Transit and coach bus · 1,182 vehicles New Flyer XD35, XD40, XD60 and 1 more Fuel system, diesel · Nov. 10, 2026
  4. Fleet SUV and car / Pickup, van and work truck · 314,029 vehicles Toyota Corolla, Tundra Air bags · Nov. 12, 2026
  5. Pickup, van and work truck · 62,490 vehicles Toyota Tundra Engine and engine cooling · Nov. 12, 2026

285 recalls · since 2010

  1. July 21, 2021 Altec Aa-Class, An-Class Utility and aerial 2020 Equipment: mechanical: boom/crane/ladder 1,284 units 21V548000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2020 AA5X/AN5X, AA5X(E)/AN5X(E), AA6X/AN6X, AA6X(E)/AN6X(E), AN4X-OC/AN4X(E)-OC, AN5X-OC/AN5X(E)-OC, AA/AN67-E100, and AA/AN67(E)-E100 vehicles. The leveling sprocket may have a failed weld between the sprocket and hub assembly.

    Consequence

    Uncontrolled platform leveling increases the risk of injury and death.

    Remedy

    Altec will inspect and replace the damaged sprocket assembly, free of charge. If no damage is observed, a secondary retention kit will be installed to limit rotation of the platform, free of charge. Owner notification letters were mailed on September 15, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 828.

    Altec Industries, Inc. · maker’s number CSN 828 · owners notified Sept. 15, 2021 · NHTSA page for the 2020 Altec An-Class ↗

    Related on MPF: Altec Industries in the Solutions Guide

  2. July 7, 2021 Altec D2000, D3000, D4000 Utility and aerial 2020–2021 Equipment: mechanical: boom/crane/ladder: hoses/cables/rods/gears/strut/cylinder 43 units 21V512000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2020-2021 D2000, 3000, and 4000 Derrick diggers. A retaining ring in the gearbox assembly was improperly seated during production, allowing the boom to unintentionally rotate freely.

    Consequence

    Unintended boom movement increases the risk of injury.

    Remedy

    Altec will repair the gearbox assembly, free of charge. Owner notification letters were mailed on September 3, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 827.

    Altec Industries, Inc. · maker’s number MAB 827 · owners notified Sept. 3, 2021 · NHTSA page for the 2021 Altec D4000 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  3. June 18, 2021 Altec Aerial Device Utility and aerial 2020–2021 Equipment 218 units 21V464000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2020-2021 AT200A, AT235, AT235P Aerial Devices. Bolts of insufficient strength may have been used to connect the pedestal and sub-base, which could cause the bolts to become overloaded.

    Consequence

    Overloaded bolts can fail, causing the pedestal to separate and increasing the risk of injury or death.

    Remedy

    Altec will issue remedy instructions to owners, to inspect the bolts, and replace any grade 5 bolts with grade 8 bolts, free of charge. Owner notification letters were mailed on July 22, 2021. Owners may contact Altec customer service at 1-800-462-5832. Altec's number for this recall is CSN 825.

    Altec Industries, Inc. · maker’s number CSN 825 · owners notified July 22, 2021 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  4. June 17, 2021 Terex Advance Front Discharge Mixer Utility and aerial 2021 Equipment 188 units 21V456000

    Defect

    Terex Advance Mixer, Inc. (Terex) is recalling certain 2021 Front Discharge Mixer Commanders & Chargers. The shaft key for the chute swing motor was not installed properly, which could result in unintentional chute movement.

    Consequence

    A chute that moves unintentionally can increase the risk of injury.

    Remedy

    Terex will provide inspection instructions, free of charge. Owner notification letters were mailed on September 15, 2021. Owners may contact Terex customer service at 1-260-497-0728.

    Terex Advance Mixer, Inc. · owners notified Sept. 15, 2021 · NHTSA page for the 2021 Terex Advance Front Discharge Mixer ↗

  5. June 1, 2021 Altec Aerial Device Utility and aerial 2005–2021 Equipment 1,977 units 21V409000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.

    Consequence

    Unintended movement of the lower and upper booms increases the risk of injury.

    Remedy

    Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on July 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 823.

    Altec Industries, Inc. · maker’s number CSN 823 · owners notified July 28, 2021 · NHTSA page for the 2021 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  6. May 12, 2021 Altec TDA58 Utility and aerial 2014–2021 Equipment 314 units 21V337000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2014-2021 TDA-58 aerial devices. The chains used to tie down the TDA-58 for transport may break.

    Consequence

    A broken tie-down chain may allow the TDA-58 to shift during transport, increasing the risk of a crash.

    Remedy

    Altetc will install new tie-down points, D-rings, and provide revised loading instructions, free of charge. Owner notification letters were mailed on July 7, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 821.

    Altec Industries, Inc. · maker’s number CSN 821 · owners notified July 7, 2021 · NHTSA page for the 2021 Altec TDA58 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  7. April 5, 2021 Altec Aerial Device Utility and aerial 2017–2018 Structure: critical fasteners 120 units 21V239000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2018 AT37/41/48M, AT41P, AT48S, L37M, L42A, and TA40 aerial device vehicles. The rotation bearing fasteners may experience stress corrosion cracking.

    Consequence

    Cracked rotation bearing fasteners may break, causing separation of the pedestal and turntable, increasing the risk of death and/or injury.

    Remedy

    Altec will notify owners, and dealers will replace the rotation bearing fasteners, free of charge. The recall began on May 21, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 807.

    Altec Industries, Inc. · maker’s number CSN 807 · owners notified May 21, 2021 · NHTSA page for the 2018 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  8. March 3, 2021 Altec DC1317 Chipper, DRM12 Wood Chipper Utility and aerial 2017–2019 Engine and engine cooling: exhaust system 355 units 21V133000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2019 DC1317 and DRM12 Chippers equipped with a gasoline engine. The flexible section of the exhaust pipe may separate, creating an exhaust gas leak.

    Consequence

    An exhaust gas leak in the engine compartment increases the risk of a fire.

    Remedy

    Altec will notify owners, and owners will receive instructions to replace the flex pipe, free of charge. The recall began April 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 802.

    Altec Industries, Inc. · maker’s number CSN 802 · owners notified April 28, 2021 · NHTSA page for the 2019 Altec DC1317 Chipper ↗

    Related on MPF: Altec Industries in the Solutions Guide

  9. March 1, 2021 Altec DT65-E, DT65-H Utility and aerial 2017–2020 Equipment: mechanical: boom/crane/ladder 613 units 21V126000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2020 DT65-H and DT65-E vehicles. The location of the capacity placard plate could cause a pinch point between the boom and the placard plate.

    Consequence

    If the operator's hand is resting on the plate it could be pinched as the boom is raised, increasing the risk of an injury.

    Remedy

    Altec will notify owners, and owners will receive instructions to relocate the placard plate from the left-hand control pod to the right-hand control pod, free of charge. The recall began on April 16, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 800.

    Altec Industries, Inc. · maker’s number CSN 800 · owners notified April 16, 2021 · NHTSA page for the 2020 Altec DT65-H ↗

    Related on MPF: Altec Industries in the Solutions Guide

  10. Jan. 15, 2021 Altec Aerial Device Utility and aerial 2016–2020 Equipment: mechanical: boom/crane/ladder 213 units 21V012000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2016-2020 DH-B Series, DH-E Series, and D3000-E digger derricks set up for combined use and equipped with radio remote upper controls. These units only have the derrick use capacity chart and do not have the combined use capacity chart.

    Consequence

    The operator may not have access to the rated capacity information while they are operating the equipment in combined use, increasing the risk of an injury.

    Remedy

    Altec will notify owners, and will require them to attach a capacity placard to the radio remote using a lanyard if it is missing, free of charge. The recall began on March 16, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 792.

    Altec Industries, Inc. · maker’s number CSN 792 · owners notified March 16, 2021 · NHTSA page for the 2020 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  11. Dec. 11, 2020 Altec Aerial Device Utility and aerial 2020 Equipment 183 units 20V777000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2020 AN67-E100 articulating non-overcenter aerial device vehicles. The boom valve has a shuttle cartridge installed instead of a plug.

    Consequence

    The valve not having a plug could result in unintended boom movement, increasing the risk of an injury.

    Remedy

    Altec will notify owners and Parker Hannifan Corporation will provide a replacement plug, free of charge. The recall began February 8, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 789.

    Altec Industries, Inc. · maker’s number CSN 789 · owners notified Feb. 8, 2021 · NHTSA page for the 2020 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  12. Dec. 10, 2020 Altec Aerial Device, Digger Derrick Utility and aerial 2018–2020 Equipment 4,987 units 20V765000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2018-2020 AA, AM, AN, A-Class, TA, DM, DL, DXXXX, DC, and DT digger derricks and aerial device vehicles equipped with a DC pump. A hydraulic check valve can have a snap ring failure resulting in the snap ring becoming lodged in a counterbalance or control valve allowing continued movement.

    Consequence

    Unintended boom movement may result in potential injury and or property damage.

    Remedy

    Altec will notify owners, and dealers will replace the valve's snap ring, free of charge. The recall began February 9, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 787.

    Altec Industries, Inc. · maker’s number CSN 787 · owners notified Feb. 9, 2021 · NHTSA page for the 2020 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  13. Nov. 17, 2020 Altec AH125, AH150 Utility and aerial 2006–2020 Suspension: adjustment: automatic electrical/hydraulic 13 units 20V708000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2006-2020 AH150 and AH125S Articulating Non-Overcenter Aerial Devices. The incorrect counterbalance valve may have been installed in the main lift cylinder. As a result, at certain boom positions the counterbalance valve will open due to the pressure in the cylinder exceeding the setting.

    Consequence

    If one of the hoses between the cylinder and the external counterbalance valve manifold were to fail to hold pressure, the boom could unexpectedly lower, increasing the risk of an injury.

    Remedy

    Altec will notify owners, and dealers will install the correct counterbalance valve if necessary, free of charge. The recall began January 11, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 784.

    Altec Industries Inc. · maker’s number CSN 784 · owners notified Jan. 11, 2021 · NHTSA page for the 2020 Altec AH125 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  14. Nov. 11, 2020 Terex TL100, TL80 Utility and aerial 2019–2020 Equipment 40 units 20V696000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2019-2020 TL80 and TL100 aerial devices. The rotation bearing bolts may loosen during unit use, causing them to fail.

    Consequence

    If the rotation bearing bolts fail, the boom could fall, increasing the risk of injury or death.

    Remedy

    Terex will notify owners, and dealers will install Field Service Kit Z1604 which includes replacement rotation bearing bolts, washers, pedestal reinforcement plates, and bolt spacers, free of charge. Owners are advised to perform a pre-shift inspection procedure until the repair is complete. The recall began November 24, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN687.

    Terex South Dakota, Inc. · maker’s number SN687 · owners notified Nov. 24, 2020 · NHTSA page for the 2020 Terex TL80 ↗

  15. Sept. 24, 2020 Altec Aerial Device, Digger Derrick Utility and aerial 2019–2020 Equipment 280 units 20V587000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2019-2020 AA55, AM50, A77-T Aerial Devices and D2/3/4B, D3E, DHB, DHH and DHE Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5252) may fail.

    Consequence

    If the fasteners break, the pedestal may separate from the turntable, increasing the risk of injury or death.

    Remedy

    Altec will notify owners, and dealers will provide replacement fasteners if necessary, free of charge. This recall began October 29, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 778.

    Altec Industries Inc. · maker’s number CSN 778 · owners notified Oct. 29, 2020 · NHTSA page for the 2020 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  16. Aug. 25, 2020 Altec Aerial Device Utility and aerial 2015–2018 Engine and engine cooling: exhaust system: emission control 17 units 20V502000

    Defect

    Altec Industries Inc. is recalling certain 2015-2018 LR7, ALB, AC18, AC23, and AC38 vehicles built on an International N9/N10 chassis. During an HC Desorb cycle, the vehicle's idle will rapidly rise causing an increase in pump flow. The increased pump flow can result in the moving speed of the boom changing.

    Consequence

    The change in boom speed can result in unintended positioning of the boom, increasing the risk of injury.

    Remedy

    Altec will notify owners, and dealers install an update that will reprogram the low idle preset to 850 RPM, free of charge. The recall began October 16, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 774.

    Altec Industries Inc. · maker’s number CSN 774 · owners notified Oct. 16, 2020 · NHTSA page for the 2018 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  17. Aug. 25, 2020 Altec EC505, EC655 Utility and aerial 2018–2020 Equipment 30 units 20V501000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2018-2020 EC505 6S+3S and EC655 6S+6S vehicles. The load holding grip of the grapple tines may loosen, resulting in a loss of load control.

    Consequence

    Loss of load control may increase the risk of death or injury.

    Remedy

    Altec will notify owners, and dealers will install a counterbalance valve with a lower pressure ratio to increase the opening threshold, free of charge. The recall began October 20, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 773.

    Altec Industries Inc. · maker’s number CSN 773 · owners notified Oct. 22, 2020 · NHTSA page for the 2020 Altec EC505 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  18. July 20, 2020 Altec Aerial Device Utility and aerial 1995–1998 Equipment 141 units 20V420000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 1995-1998 Altec A0442 aerial devices. The boom lift hydraulic cylinder end gland may fail causing uncontrolled boom movement.

    Consequence

    Uncontrolled movement of the boom can increase the risk of injury.

    Remedy

    Altec will notify owners, and instruct them to inspect the boom lift cylinders for an externally threaded head gland design. The customer will be instructed whether the unit can be used with restricted lower and/or upper boom articulation until the cylinder(s) are repaired or replaced, free of charge. The recall began September 14, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 770.

    Altec Industries Inc. · maker’s number MAB 770 · owners notified Sept. 14, 2020 · NHTSA page for the 1998 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  19. July 10, 2020 Altec Aerial Device Utility and aerial 2017–2020 Equipment 2,550 units 20V401000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2017-2020 AT200A, AT235, AT37-G, AT40-G, AT41/48M Aerial Devices mounted on a Ford F-350, F-450 or F-550 chassis equipped with a gas engine and Chelsea 249 Power Take-Off (PTO). The PTO may leak oil onto the exhaust heat shield thermal blanket.

    Consequence

    Oil absorbed by the exhaust heat shield thermal blanket has an increased risk of a fire from being exposed to hot engine components.

    Remedy

    Altec will notify owners, and dealers will inspect and replace the heat shield with a redesigned version, as well as install plumbing to relocate a pressure switch and install hoses with improved routing to increase their distance from heat sources, free of charge. The recall began September 8, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 767.

    Altec Industries Inc. · maker’s number CSN 767 · owners notified Sept. 8, 2020 · NHTSA page for the 2020 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  20. May 26, 2020 Altec Aerial Device Utility and aerial 2014–2020 Equipment: other: labels 396 units 20V301000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.

    Consequence

    If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.

    Remedy

    Altec will notify owners and provide instructions for inspecting the bumper and receiver tube for damage and repairing as necessary and installing the proper hitch load rating placards on the unit. This recall began July 24, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 761.

    Altec Industries Inc. · maker’s number CSN 761 · owners notified July 24, 2020 · NHTSA page for the 2020 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  21. May 19, 2020 Altec Aerial Device, Digger Derrick Utility and aerial 2018–2020 Equipment 157 units 20V282000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2018-2020 AA55, AM50 and A77 Aerial Devices and D2, D3, D4, DH-B and DH-H Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5185) may fail.

    Consequence

    If the fasteners break, the pedestal may separate from turntable, increasing the risk of injury or death.

    Remedy

    Altec will notify owners and will provide replacement fasteners if necessary, free of charge. This recall began July 2, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 760.

    Altec Industries Inc. · maker’s number CSN 760 · owners notified July 2, 2020 · NHTSA page for the 2020 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  22. April 29, 2020 Terex TL80, TL80/112 Utility and aerial 2019–2020 Equipment 43 units 20V240000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2019-2020 TL80 and TL80/112 aerial devices. The installed slope indicator and decals incorrectly state that the chassis can be 5 degrees out of level for aerial device use.

    Consequence

    If the aerial device is used with the chassis out of level it may result in an unstable condition which may cause the unit to tip, increasing the risk of injury to the operator and any bystanders.

    Remedy

    Terex will notify owners, and dealers will replace the incorrect slope indicator and decals, free of charge. The recall began May 12, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN685.

    Terex South Dakota, Inc. · maker’s number SN685 · owners notified May 12, 2020 · NHTSA page for the 2020 Terex TL80/112 ↗

  23. April 21, 2020 Altec ST Spray Truck Utility and aerial 2017–2020 Electrical system: 12v/24v/48v battery 92 units 20V225000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2017-2020 ST Spray Trucks. The battery fuse holder may have been improperly mounted, potentially causing an electrical short circuit.

    Consequence

    An electrical short circuit can increase the risk of a fire.

    Remedy

    Altec will notify owners and will install a new battery fuse holder, free of charge. The recall is expected to begin June 16, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 758.

    Altec Industries Inc. · maker’s number CSN 758 · owners notified June 8, 2020 · NHTSA page for the 2020 Altec ST Spray Truck ↗

    Related on MPF: Altec Industries in the Solutions Guide

  24. April 7, 2020 Terex Digger Derrick Utility and aerial 2018–2019 Engine 20 units 20V200000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2018-2019 C4045, C4047, C5050, and C7066 Digger Derrick vehicles. Due to an engine computer program error, if the hood switch fails or opens, the remote engine start/stop function becomes disabled.

    Consequence

    A disabled remote engine start/stop prevents the digger derrick operator from shutting the engine off during hydraulic issues on the digger, increasing the risk of injury.

    Remedy

    Terex will notify owners, and dealers will reprogram the engine computer program, free of charge. The recall began April 16, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN682.

    Terex South Dakota, Inc. · maker’s number SN682 · owners notified April 16, 2020 · NHTSA page for the 2019 Terex Digger Derrick ↗

  25. March 30, 2020 Altec AT200A Utility and aerial 2016–2018 Tires: markings 16 units 20V187000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2016-2018 AT200A vehicles built on Ford E-350 Cutaway chassis. The rear tire size and load rating may be incorrect, possibly resulting in the vehicle being overloaded.

    Consequence

    An overload condition may reduce the vehicle's stability or result in tire failure, increasing the risk of a crash.

    Remedy

    Altec will notify owners, and dealers will inspect the tires and replace any that are not the correct size and load rating, free of charge. The recall began May 22, 2020. Owners may contact Altec customer service at 1-877-462-5832.

    Altec Industries Inc. · maker’s number CSN 756 · owners notified May 22, 2020 · NHTSA page for the 2018 Altec AT200A ↗

    Related on MPF: Altec Industries in the Solutions Guide

Recall details are NHTSA’s and CPSC’s own text. Fleet classes are MPF’s grouping of NHTSA makes and models; police variants are often filed under the civilian model name, so also search the civilian model. Check every vehicle by VIN at nhtsa.gov/recalls.