Skip to content

Fleet tools

Fleet Recall Roundup

National Highway Traffic Safety Administration (NHTSA) safety recalls since 2010 for the vehicles and equipment public fleets run, plus Consumer Product Safety Commission (CPSC) recalls of the mowers, utility vehicles, tractors and power equipment public agencies use. Sort and filter by fleet class, make, model year and component, or open the list up to every vehicle.

Sources: NHTSA recall data and CPSC recalls · Updated nightly · Last refresh Nov. 20, 2026

This week’s top recalls for public fleets

Recalls NHTSA and CPSC posted Nov. 9, 2026 to Nov. 15, 2026, ranked by drive, parking and stop-using warnings, then by the kind of vehicle (emergency and passenger vehicles first) weighed against how many are affected. Updated every Monday.

  1. CPSC says stop using · Grounds and off-road equipment · 2,960 units Cummins Cummins Onan P5000iDF EFI Dual Fuel Portable Generators Generators and light towers · Nov. 12, 2026
  2. Fire apparatus · 937 vehicles Rosenbauer Avenger, Commander, Warrior Electrical system · Nov. 9, 2026
  3. Transit and coach bus · 1,182 vehicles New Flyer XD35, XD40, XD60 and 1 more Fuel system, diesel · Nov. 10, 2026
  4. Fleet SUV and car / Pickup, van and work truck · 314,029 vehicles Toyota Corolla, Tundra Air bags · Nov. 12, 2026
  5. Pickup, van and work truck · 62,490 vehicles Toyota Tundra Engine and engine cooling · Nov. 12, 2026

285 recalls · since 2010

  1. Jan. 11, 2018 Altec Aerial Device Utility and aerial 2017 Electrical system: wiring: fuses and circuit breakers 29 units 18V035000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2017 AT Aerial Devices mounted on Ford F-550 chassis. A circuit breaker located under the hood may contact the hood, potentially resulting in an electrical short.

    Consequence

    An electrical short can increase the risk of a fire.

    Remedy

    Altec has notified owners, and dealers will update the circuit breaker bracket and install a insulating chafe pad, free of charge. The recall began on January 12, 2018. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is MAB 675.

    Altec Industries Inc. · maker’s number MAB 675 · owners notified Jan. 12, 2018 · NHTSA page for the 2017 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  2. Jan. 8, 2018 Terex XT Pro 56, XT Pro 60 Utility and aerial 2015–2017 Equipment 1,526 units 18V008000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2015-2017 XT Pro 56, and XT Pro 60 aerial devices. The platform control enable system may be adjusted incorrectly. If not assembled and adjusted properly it may allow the rotation to move slowly if the enable is not depressed.

    Consequence

    If the rotation system moves without the enable being depressed, it can increase the risk of injury.

    Remedy

    Terex will notify owners, and dealers will inspect the single stick controls, making sure that they are assembled correctly and adjusted properly, free of charge. The recall began on March 7, 2018. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN663.

    Terex South Dakota, Inc. · maker’s number SN663 · owners notified March 7, 2018 · NHTSA page for the 2017 Terex XT Pro 60 ↗

  3. Jan. 4, 2018 Altec 470 Knuckle Boom Crane, Effer 440 Utility and aerial 2010–2011 Equipment 4 units 18V006000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2010-2011 Effer 440 and 470 Knuckle Boom Cranes. The inner race rotation bearing fasteners for the crane turret may fail and the pedestal may crack if the fasteners are not replaced every two years.

    Consequence

    If the rotation bearing fasteners fail or the pedestal cracks, the crane may not be stable, increasing the risk of injury.

    Remedy

    Altec will notify owners, and dealers will inspect the pedestal weld for cracks and replace the inner race rotation bearing fasteners, free of charge. The recall began on February 2, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 674.

    Altec Industries Inc. · maker’s number CSN 674 · owners notified Feb. 2, 2018 · NHTSA page for the 2011 Altec 470 Knuckle Boom Crane ↗

    Related on MPF: Altec Industries in the Solutions Guide

  4. Nov. 13, 2017 Altec Aerial Cable Placer Utility and aerial 1992–2000 Equipment: mechanical 375 units 17V709000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 1992-2000 Aerial Cable Placer AP45 vehicles. The boom tips on these vehicles may crack and fail.

    Consequence

    If the boom tip fails, it can increase the risk of injury.

    Remedy

    Altec will notify owners, and dealers will inspect the boom tip, replacing any that are of an old design or have cracks, free of charge. The recall began on December 7, 2017. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN655.

    Altec Industries Inc. · maker’s number CSN 655 · owners notified Dec. 7, 2017 · NHTSA page for the 2000 Altec Aerial Cable Placer ↗

    Related on MPF: Altec Industries in the Solutions Guide

  5. Sept. 11, 2017 Altec Aerial Device Utility and aerial 2011–2017 Equipment 143 units 17V560000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2011-2017 Altec LS63 Aerial Devices. The jib mast on these vehicles may bend under load.

    Consequence

    The jib mast may bend and fail, increasing the risk of injury to those nearby.

    Remedy

    Altec will notify owners and test the jib mast, replacing any that fail, free of charge. The recall began on October 13, 2017. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 664.

    Altec Industries Inc. · maker’s number CSN 664 · owners notified Oct. 13, 2017 · NHTSA page for the 2017 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  6. May 31, 2017 Terex Advance Front Discharge Concrete Utility and aerial 2017 Equipment 53 units 17V353000

    Defect

    Terex Advance Mixer, Inc. (Terex) is recalling certain 2017 Front Discharge Mixers, equipped with certain 250 gallon water tanks. The welds that attach the filler neck onto the 250 gallon pressurized water tank may fail.

    Consequence

    If the weld fails, the filler neck may separate from the pressurized tank, increasing the risk of injury.

    Remedy

    Terex will replace the affected water tanks, free of charge. The recall began on July 25, 2017. Owners may contact Terex customer service at 1-800-678-5961.

    Terex Advance Mixer, Inc. · owners notified July 25, 2017 · NHTSA page for the 2017 Terex Advance Front Discharge Concrete ↗

  7. May 15, 2017 Terex Aerial Devices, Digger Derrick Utility and aerial 2012–2017 Electrical system 444 units 17V321000

    Defect

    Terex South Dakota (TSD) is recalling certain 2012-2017 Digger Derricks and Aerial Devices, models C4000, C5000, C6000, C7000, General, HR, OM, RM,RMX, SC, SCM, TC, TCX, TL, TM, and XT, built on Freightliner chassis with SmartPlex engine controls. The vehicles have a switch to monitor whether the hood is open or not. If the switch thinks that the hood is open, the vehicle software may disable the Aerial or Digger Derrick remote engine control functions.

    Consequence

    If the hood switch prevents the remote engine controls from shutting the vehicle engine down in the event of a hydraulic issue on the Aerial or Digger Derrick, it may increase the risk of an injury.

    Remedy

    TSD will notify owners, and dealers will reprogram the vehicles to only disable the engine start function if the switch indicates that the hood is open, free of charge. The recall began on June 28, 2017. Owners may contact TSD Customer Service Department at 1-800-982-8975. TSD's number for this recall is SN659.

    Terex South Dakota, Inc. · maker’s number SN659 · owners notified June 28, 2017 · NHTSA page for the 2017 Terex Digger Derrick ↗

  8. May 15, 2017 Terex Aerial Devices, Digger Derrick Utility and aerial 2007–2016 Equipment 58 units 17V320000

    Defect

    Terex South Dakota (TSD) is recalling certain 2007-2016 vehicles equipped with Terex C4000, FC, HR, HRX, SCM, TC, TCX, TL, TPL, and XT aerial devices and digger derricks used for utility line work. In the event of a short circuit of a tool plugged into the onboard electrical socket, the GFPE breaker may not trip at the proper current before the user receives a shock.

    Consequence

    Without proper protection against electrical shock, the user has a greater risk of injury.

    Remedy

    TSD will notify owners, and dealers will replace the breakers with GFCI breakers that will trip at a lower current, free of charge. The recall began on June 27, 2017. Owners may contact TSD Customer Service Department at 1-800-982-8975. TSD's number for this recall is SN658.

    Terex South Dakota, Inc. · maker’s number SN658 · owners notified June 27, 2017 · NHTSA page for the 2016 Terex Aerial Devices ↗

  9. April 7, 2017 Altec Aerial Device Utility and aerial 2004–2005 Structure 199 units 17V236000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2004-2005 AM547, AM650, 855, 862 Aerial Devices and AM650 and 855 Elevators. The fiberglass upper boom on these vehicles may fail without warning.

    Consequence

    If the upper boom were to fail during operation, it would increase the risk of serious injury or death.

    Remedy

    Altec has notified owners, and dealers will inspect the fiberglass upper boom, free charge. The recall began on April 7, 2017. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 654.

    Altec Industries Inc. · maker’s number CSN 654 · owners notified April 7, 2017 · NHTSA page for the 2005 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  10. March 14, 2017 Altec Aerial Device, Service Body Utility and aerial 2015–2016 Electrical system: wiring 335 units 17V175000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2015-2016 Aerial devices and Service Body Trucks equipped with certain JEMS 4A or JEMS 4E4 Idle Mitigation Systems (IMS). A cable within the IMS may have been improperly installed, possibly causing the cable to rub against an electrical component and short circuit.

    Consequence

    A short circuit increases the risk of fire.

    Remedy

    Altec will notify owners, and dealers will replace and reroute the contactor cable within the IMS, free of charge. The recall began on April 13, 2017. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for the recall is CSN 646.

    Altec Industries Inc. · maker’s number CSN 646 · owners notified April 13, 2017 · NHTSA page for the 2016 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  11. Feb. 17, 2017 Altec AH125, AH150, HL125 Utility and aerial 2015–2016 Equipment 10 units 17V109000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain 2015-2016 AH125, AH150, and HL125 aerial device vehicles. In the affected vehicles, the rotation bearing fasteners may fail.

    Consequence

    If the fasteners that attach the aerial device to the truck fail, the boom may unintentionally move, increasing the risk of personal injury or death to the aerial device user or those nearby.

    Remedy

    Altec has notified owners, and dealers will inspect and if necessary replace the fasteners, free if charge. The recall began on February 24, 2017. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 651.

    Altec Industries Inc. · maker’s number MAB 651 · owners notified Feb. 24, 2017 · NHTSA page for the 2016 Altec AH150 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  12. Feb. 17, 2017 Altec Digger Derrick Utility and aerial 2016 Structure 35 units 17V107000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2016 DLB Digger Derrick vehicles. The fasteners that secure the outer rotation bearings may fail.

    Consequence

    If the fasteners that attach the rotation platform to the truck fail, the digger boom may unintentionally move, increasing the risk of injury to the user or those nearby.

    Remedy

    Altec has notified owners, and dealers will inspect and replace the fasteners, as necessary, free of charge. The recall began on February 24, 2017. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 650.

    Altec Industries Inc. · maker’s number MAB 650 · owners notified Feb. 24, 2017 · NHTSA page for the 2016 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  13. Jan. 9, 2017 Altec Telescoping Aerial Device Utility and aerial 2005–2016 Equipment: mechanical: winch 617 units 17V009000

    Defect

    Altec Industries Inc. (Altec) is recalling certain 2005-2016 TA37M, TA41M, TA45M telescoping aerial devices. The winch brake on these vehicles may be improperly oriented, possibly resulting in unexpected winch line movement.

    Consequence

    If the winch boom line unexpectedly moves, there may be an increased risk of injury.

    Remedy

    Altec will notify owners, and dealers will reverse the direction of the winch brake and check and adjust the winch brake torque setting, free of charge. The recall began on March 15, 2017. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 643.

    Altec Industries Inc. · maker’s number CSN 643 · owners notified March 15, 2017 · NHTSA page for the 2016 Altec Telescoping Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  14. Nov. 17, 2016 Altec Aerial Device Utility and aerial 1995–1999 Equipment 2,194 units 16V835000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 1995-1999 Aerial Device trucks manufactured May 1, 1995, to August 15, 1999 and equipped with Rosenboom Machine and Tool lower boom lift cylinders. The cylinder end gland could fail which could cause uncontrolled boom movement.

    Consequence

    Uncontrolled boom movement may increase the risk of injury to the operator or bystanders.

    Remedy

    Altec will notify owners, and dealers will inspect the boom, and repair or replace the cylinder, free of charge. The recall began on January 13, 2017. Owners may contact Altec customer service at 1-205-991-7733.

    Altec Industries Inc. · owners notified Jan. 13, 2017 · NHTSA page for the 1999 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  15. Nov. 7, 2016 Terex Advance Front Discharge Concrete Utility and aerial 2016–2017 Suspension: front: king pin 19 units 16V806000

    Defect

    Terex Advance Mixer, Inc. (Terex) is recalling certain model year 2016-2017 Front Discharge Mixers manufactured July 1, 2016, to September 30, 2016, equipped with certain Meritor front drive steer axles. These front axles have a king-pin that may fracture and possibly result in wheel end separation.

    Consequence

    If the wheel end separates, a loss of vehicle control may result, increasing the risk of a crash.

    Remedy

    Terex will notify owners, and dealers will replace all of the affected lower king-pins, free of charge. The recall began on January 5, 2017. Owners may contact Terex customer service at 1-800-678-5961.

    Terex Advance Mixer, Inc. · owners notified Jan. 5, 2017 · NHTSA page for the 2017 Terex Advance Front Discharge Concrete ↗

  16. Nov. 4, 2016 Terex TC, TCX Utility and aerial 2009–2014 Equipment 6 units 16V805000

    Defect

    Terex South Dakota (TSD) is recalling certain model year 2009-2014 Terex TC, and TCX hybrid electric trucks manufactured June 8, 2009, to July 30, 2014 and equipped with aerial devices. The affected vehicles may be improperly wired, and as a result, the aerial boom may move unintentionally when the hydraulic tools are being used.

    Consequence

    Inadvertent boom movement can cause the platform to strike objects in the work area, increasing the risk of injury to the operator.

    Remedy

    TSD will notify owners, and dealers will install a diode and alter the wiring to correct the issue, free of charge. The recall began on November 20, 2016. Owners may contact TSD customer service at 1-800-982-8975. TSD's number for this recall is SN631.

    Terex South Dakota, Inc. · maker’s number SN631 · owners notified Nov. 20, 2016 · NHTSA page for the 2014 Terex TC ↗

  17. Oct. 5, 2016 Altec Aerial Device Utility and aerial 2014–2015 Equipment 219 units 16V710000

    Defect

    Altec Industries Inc (Altec) is recalling certain model year 2014-2015 A65, A70, A75, A72-T, A77-T, and A82-T aerial devices manufactured April 15, 2014, to October 15, 2015. The affected aerial devices have a fiberglass cover over the boom tip that may have an improperly sized opening.

    Consequence

    The improperly sized opening may allow the exposed metal tip of the boom to contact an electrically energized conductor, such as an overhead wire, increasing the risk of a injury to the boom operator.

    Remedy

    Altec will notify owners, and dealers will replace any boom tip cover that has an improperly sized opening, free of charge. The recall began on December 1, 2016. Owners may contact Altec customer service at 1-205-991-7733.

    Altec Industries Inc. · owners notified Dec. 1, 2016 · NHTSA page for the 2015 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  18. July 14, 2016 Altec Aerial Device, Digger Derrick Utility and aerial 2015–2016 Equipment: mechanical: winch 252 units 16V536000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2015-2016 Aerial Devices and Digger Derrick vehicles equipped with front bumper winches or capstans, manufactured December 26, 2015, to March 30, 2016. The affected vehicles have a hydraulic motor whose shaft may fail resulting in unexpected movement of the winch or the capstan.

    Consequence

    Unexpected winch movement may increase the risk of injury.

    Remedy

    Altec will notify owners, and dealers will replace the hydraulic motor, free of charge. The recall began on August 26, 2016, 2016. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 635.

    Altec Industries Inc. · maker’s number CSN 635 · owners notified Aug. 26, 2016 · NHTSA page for the 2016 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  19. June 28, 2016 Terex HR, HRX, TC, TCX Utility and aerial 2015–2016 Equipment 400 units 16V477000

    Defect

    Terex South Dakota (TSD) is recalling certain model year 2015-2016 HR, HRX, TC, and TCX Aerial devices manufactured May 4, 2015, to June 15, 2016. The platform leveling cylinder on the affected vehicles may have poor welds, and as a result, platform leveling cylinder may fail at the elbow, allowing the platform to tilt.

    Consequence

    If the platform tilts, the platform occupant may fall, increasing their risk of injury.

    Remedy

    TSD will notify owners, and dealers will replace the hydraulic cylinders, free of charge. The recall began on August 22, 2016. Owners may contact TSD Customer Service Department at 1-800-982-8975. TSD's number for this recall is SN642.

    Terex South Dakota, Inc. · maker’s number SN642 · owners notified Aug. 22, 2016 · NHTSA page for the 2016 Terex HRX ↗

  20. June 14, 2016 Terex HR, HRX, LT, LTM, TC, TCX and 1 more Utility and aerial 2016 Equipment: mechanical: winch 440 units 16V435000

    Defect

    Terex South Dakota, Inc. (TSD) is recalling certain model year 2016 HR, HRX, LT, LTM, TL, TC, and TCX aerial devices manufactured January 1, 2016, to May 12, 2016. These aerial devices have a hydraulic motor whose shaft may fail resulting in unexpected boom rotation or winch movement.

    Consequence

    Unexpected boom rotation or winch movement may increase the risk of injury.

    Remedy

    TSD will notify owners, and instruct owners to inspect the hydraulic motor. Motors within a certain serial number range will be replaced, free of charge. The recall began on August 3, 2016. Owners may contact TSD customer service at 1-800-982-8975. TSD's number for this recall is SN641.

    Terex South Dakota, Inc. · maker’s number SN641 · owners notified Aug. 3, 2016 · NHTSA page for the 2016 Terex LTM ↗

  21. June 8, 2016 Terex Advance Front Discharge Concrete Utility and aerial 2016 Equipment 338 units 16V413000

    Defect

    Terex Advance (Terex) is recalling certain model year 2016 Front Discharge Concrete Mixer trucks manufactured January 14, 2016, to May 31, 2016. The weld on the outer chute race may fail causing the main chute to detach and fall off while the vehicle is in motion.

    Consequence

    If the main chute detaches while the vehicle is being driven there would be an increased risk of a crash.

    Remedy

    Terex has notified the affected owners, and dealers will replace the main chute race assembly, free of charge. The recall began on June 13, 2016. Owners may contact Terex customer service at 1-800-678-5961. Terex's number for this recall is Construction_000278.

    Terex Advance · maker’s number Construction_000278 · owners notified June 13, 2016 · NHTSA page for the 2016 Terex Advance Front Discharge Concrete ↗

  22. June 1, 2016 Terex Advance Front Discharge Concrete Utility and aerial 2016 Engine and engine cooling: engine: diesel 21 units 16V388000

    Defect

    Terex Advance (Terex) is recalling certain model year 2016 Front Discharge Mixer trucks manufactured March 31, 2016, to May 9, 2016 equipped with a Cummins ISX12 or ISX15 engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine.

    Consequence

    An engine stall can increase the risk of a crash.

    Remedy

    Cummins will notify owners, and dealers will replace the existing ECM with a new ECM, free of charge. The recall began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357 or Terex customer service at 1-800-433-6691.

    Terex Advance · owners notified July 8, 2016 · NHTSA page for the 2016 Terex Advance Front Discharge Concrete ↗

  23. May 26, 2016 Terex Advance Mixer FD3000, Mixer FD4000, Mixer FD6000B Utility and aerial 2015–2016 Power train: axle assembly 117 units 16V371000

    Defect

    Terex Advance (Terex) is recalling certain model year 2015-2016 Mixer FD3000, FD4000, and FD6000B vehicles manufactured August 1, 2014, to September 30, 2015, and equipped with drive axles manufactured by Marmon-Herrington. The affected axles may have hex nuts on the flange yoke that may not have been properly tightened.

    Consequence

    If the hex nuts are not tightened to specification, the driveshaft may disconnect from the drive axle, resulting in a loss of propulsion and increasing the risk of a crash.

    Remedy

    Terex will notify owners and provide instructions to properly torque the bolts. The recall began on July 15, 2016. Owners may contact Terex customer service at 1-800-433-6691.

    Terex Advance · owners notified July 15, 2016 · NHTSA page for the 2016 Terex Advance Mixer FD3000 ↗

  24. May 16, 2016 Altec Digger Derrick Utility and aerial 2014–2016 Equipment 63 units 16V307000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2014-2016 DL and DM Digger Derricks manufactured October 1, 2014, to April 30, 2016 with the digger booms mounted in the corner. The rotation bearing fasteners on the affected vehicles may not have been properly torqued.

    Consequence

    If the fasteners are loose or improperly torqued, structural failure may result, causing unexpected movement of the digger derrick and increasing the risk of injury.

    Remedy

    Altec has notified owners, and instruct them to perform the annual torque inspection, free of charge. The recall began June 2, 2016. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 633.

    Altec Industries Inc. · maker’s number CSN 633 · owners notified June 2, 2016 · NHTSA page for the 2016 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  25. April 21, 2016 Terex XT52, XT55, XT60 Utility and aerial 2001–2003 Structure: body 1,332 units 16V233000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2001-2003 XT52, XT55 and XT60 aerial devices manufactured January 1, 2001, to May 31, 2003. The affected trucks have aerial devices that may have been built with lower booms made of material of insufficient strength.

    Consequence

    Booms made from weaker materials may crack and fail, increasing the risk of injury to the boom operator or those nearby.

    Remedy

    Terex will notify owners, and dealers will inspect the lower boom to verify that it was made with the correct material. Any boom that was made with an improper material will be replaced, free of charge. The recall began on June 9, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's recall campaign number is SN618. Note: This recall is an expansion of recall 15V-353.

    Terex South Dakota, Inc. · maker’s number SN618 · owners notified June 9, 2016 · NHTSA page for the 2003 Terex XT60 ↗

Recall details are NHTSA’s and CPSC’s own text. Fleet classes are MPF’s grouping of NHTSA makes and models; police variants are often filed under the civilian model name, so also search the civilian model. Check every vehicle by VIN at nhtsa.gov/recalls.