Skip to content

Fleet tools

Fleet Recall Roundup

National Highway Traffic Safety Administration (NHTSA) safety recalls since 2010 for the vehicles and equipment public fleets run, plus Consumer Product Safety Commission (CPSC) recalls of the mowers, utility vehicles, tractors and power equipment public agencies use. Sort and filter by fleet class, make, model year and component, or open the list up to every vehicle.

Sources: NHTSA recall data and CPSC recalls · Updated nightly · Last refresh Nov. 20, 2026

This week’s top recalls for public fleets

Recalls NHTSA and CPSC posted Nov. 9, 2026 to Nov. 15, 2026, ranked by drive, parking and stop-using warnings, then by the kind of vehicle (emergency and passenger vehicles first) weighed against how many are affected. Updated every Monday.

  1. CPSC says stop using · Grounds and off-road equipment · 2,960 units Cummins Cummins Onan P5000iDF EFI Dual Fuel Portable Generators Generators and light towers · Nov. 12, 2026
  2. Fire apparatus · 937 vehicles Rosenbauer Avenger, Commander, Warrior Electrical system · Nov. 9, 2026
  3. Transit and coach bus · 1,182 vehicles New Flyer XD35, XD40, XD60 and 1 more Fuel system, diesel · Nov. 10, 2026
  4. Fleet SUV and car / Pickup, van and work truck · 314,029 vehicles Toyota Corolla, Tundra Air bags · Nov. 12, 2026
  5. Pickup, van and work truck · 62,490 vehicles Toyota Tundra Engine and engine cooling · Nov. 12, 2026

285 recalls · since 2010

  1. March 29, 2016 Terex Aerial Devices Utility and aerial 2011–2016 Structure 2,153 units 16V177000

    Defect

    Terex South Dakota (Terex) is recalling certain model year 2011-2016 HR, HRX, TC, TCX, and SML aerial devices. The affected aerial devices may have inadequate welds at the boom tip leveling sprockets. A failure of these welds may result in the platform tilting unexpectedly.

    Consequence

    If the platform tilts unexpectedly, the user may fall, increasing their risk of injury.

    Remedy

    Terex will notify owners. Terex will notify owners and provide a leveling sprocket for any unit with a cracked weld on the leveling sprocket or provide a reinforcement kit for any unit without a cracked weld on the leveling sprocket, free of charge. The recall began on May 24, 2016. Owners may contact Terex South Dakota at 1-800-982-8975. Terex's number for this recall is SN638.

    Terex South Dakota, Inc. · maker’s number SN638 · owners notified May 24, 2016 · NHTSA page for the 2016 Terex Aerial Devices ↗

  2. March 28, 2016 Terex Aerial Devices Utility and aerial 2007–2013 Structure 33 units 16V174000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2007-2013 TLM37, TLM40, TLM41, and TLM50 aerial devices manufactured March 29, 2007, to January 31, 2013. The aerial devices have the pedestal attached to the lift turrets that may crack due to missing reinforcements.

    Consequence

    Cracks, if not repaired, may result in the failure of the aerial pedestal, increasing the risk of injury to the operator or those nearby.

    Remedy

    Terex will notify owners, and dealers will install reinforcement plates on the pedestal, free of charge. The recall began on April 22, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN622.

    Terex South Dakota, Inc. · maker’s number SN622 · owners notified April 22, 2016 · NHTSA page for the 2013 Terex Aerial Devices ↗

  3. March 16, 2016 Terex C5000, C6000, General 80, HRX, RMX, TM100 and 1 more Utility and aerial 2008–2016 Suspension: front: springs: air suspension: springs/bags 131 units 16V154000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2015-2016 C5000, C6000, General 80, RMX, TM100, and TM125 aerial devices, and digger derrick lifts installed on trucks manufactured August 4, 2015, to February 16, 2016. The suspension circuit can inflate the suspension air bags on the affected vehicles if the Master/PTO switch or ignition is turned off in the cab while the boom is in the raised position. This can cause the frame to rise, lifting the outriggers from the ground.

    Consequence

    If the outrigger lifts off the ground, causing instability of the truck, it can increase the risk of injury to the operator.

    Remedy

    Terex will notify owners, and dealers will install a second outrigger enable relay, free of charge. The recall began on April 29, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN636.

    Terex South Dakota, Inc. · maker’s number SN636 · owners notified April 29, 2016 · NHTSA page for the 2016 Terex HRX ↗

  4. Feb. 29, 2016 Terex Aerial Devices Utility and aerial 2008–2015 Equipment 465 units 16V118000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain 2008-2015 TLM37, TLM37P, TLM39, TLM41, TLM50, TLM55, and TLLM60 aerial devices manufactured June 18, 2008, to September 28, 2015. On the affected devices, both the boom tip leveling cylinder and the master cylinder at the elbow may make contact with the structural components, potentially damaging the boom tip leveling cylinder rod eye and the master cylinder rod eye.

    Consequence

    Repeated contact may result in the rod eyes cracking. This cracking can lead to the failure of the boom tip leveling cylinder rod eye and the platform tilting unexpectedly which could cause the occupants to fall from the aerial platform, increasing their risk of injury.

    Remedy

    Terex will notify owners, and dealers will modify the aerial devices to prevent the components from making contact. The recall began on April 11, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN621.

    Terex South Dakota, Inc. · maker’s number SN621 · owners notified April 11, 2016 · NHTSA page for the 2015 Terex Aerial Devices ↗

  5. Jan. 26, 2016 Terex Aerial Devices Utility and aerial 2011–2015 Structure 73 units 16V040000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2011-2015 SCM48, SCM50, and SCM55 aerial devices manufactured August 24, 2011, to November 5, 2015. The affected vehicles have a leveling cylinder linkage that can be forced past its intended stop position, causing damage to, and failure of, the leveling system.

    Consequence

    If the leveling system fails, the aerial platform may tilt, increasing the risk of injury to the user or those nearby.

    Remedy

    Terex will notify owners, and dealers will install a stop to prevent excessive cylinder linkage movement, free of charge. The recall began on February 22, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN627.

    Terex South Dakota, Inc. · maker’s number SN627 · owners notified Feb. 22, 2016 · NHTSA page for the 2015 Terex Aerial Devices ↗

  6. Jan. 20, 2016 Altec AH100, AH75, AH85 Utility and aerial 2010–2015 Electrical system 195 units 16V023000

    Defect

    Altec Industries (Altec) is recalling certain model year 2010-2015 AH75, AH85, and AH100 Aerial Devices manufactured January 10, 2008, to December 31, 2015. The affected units have a hydraulic pressure control valve that may allow the aerial device to move even when not told to do so.

    Consequence

    An aerial device that moves unexpectedly increases the risk of injury to the operator.

    Remedy

    Altec will notify owners, and dealers will replace the hydraulic pressure control valves, free of charge. The recall began on March 15, 2016. Owners may contact Altec customer service at 1-205-991-7733.

    Altec Industries Inc. · owners notified March 15, 2016 · NHTSA page for the 2015 Altec AH85 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  7. Dec. 1, 2015 Altec DC610 Brush Chipper, DSC6 Brush Chipper Utility and aerial 2011–2015 Equipment 718 units 15V810000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2011-2015 DC610 and DSC6 Brush Chippers manufactured June 1, 2011, to April 1, 2015. The affected brush chippers may have improper or missing welds. Additionally, the DSC6 chippers may be equipped with incorrect anvil spacers.

    Consequence

    Improper or missing welds and/or incorrect anvil spacers may cause the anvil to detach and interfere with the cutting blades, significantly damaging the chipper and increasing the risk of injury.

    Remedy

    Altec will notify owners, and dealers will inspect and repair any of the missing or incorrect anvil welds, and will replace the improper anvil spacers, free of charge. The recall began on January 19, 2016. Owners may contact Altec customer service at 1-800-860-0183. Altec's number for this recall is CSN 626.

    Altec Industries Inc. · maker’s number CSN 626 · owners notified Jan. 19, 2016 · NHTSA page for the 2015 Altec DSC6 Brush Chipper ↗

    Related on MPF: Altec Industries in the Solutions Guide

  8. Oct. 26, 2015 Terex Advance Mixer FD4000B, Mixer FD5000B, Mixer FD6000B, Mixer FD7000B Utility and aerial 2011–2015 Steering 288 units 15V703000

    Defect

    Terex Advance (Terex) is recalling certain model year 2011-2015 FD4000B, FD5000D, FD6000B, and FD7000B concrete mixers manufactured January 1, 2011, to September 1, 2015. The affected vehicles have steerable tag axles operated by Eaton Hydraulics S26 Gear Pumps. These gear pumps may unexpectedly fail, reducing the ability to properly steer the vehicle.

    Consequence

    The loss of steering ability may increase the risk of a crash.

    Remedy

    Terex will notify owners, and dealers will replace the S26 gear pumps, free of charge. The recall began on December 22, 2015. Owners may contact Terex customer service at 1-800-433-6691.

    Terex Advance · owners notified Dec. 22, 2015 · NHTSA page for the 2015 Terex Advance Mixer FD4000B ↗

  9. Aug. 13, 2015 Terex Aerial Devices, Digger Derrick Utility and aerial 2013–2014 Structure: frame and members 386 units 15V512000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2013-2015 Aerial Devices and Digger Derrick trucks manufactured from June 3, 2013, through November 13, 2014. Due to an issue in assembly, the vertical cylinders and, by extension, the outriggers may drift when loaded.

    Consequence

    Outrigger drifting could result in the platform falling and seriously injuring platform occupants or bystanders.

    Remedy

    Terex will notify owners, and dealers will install the orifice and replace the affected valves, free of charge. The recall began on November 5, 2015. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN619.

    Terex South Dakota, Inc. · maker’s number SN619 · owners notified Nov. 5, 2015 · NHTSA page for the 2014 Terex Aerial Devices ↗

  10. July 28, 2015 Altec Aerial Device Utility and aerial 2006–2015 Equipment 2,514 units 15V473000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2006-2015 Aerial Devices manufactured from June 1, 2006, through April 1, 2015. The affected aerial devices outrigger interlock control system may not detect proper deployment of the outriggers, allowing for instability of the boom.

    Consequence

    If the aerial device is operated while the outrigger is not properly deployed it can cause instability of the boom, increasing the risk of person injury or death.

    Remedy

    Altec will notify owners, and dealers will replace the aerial device with a new outrigger interlock module, free of charge. The recall began on September 4, 2015. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 625.

    Altec Industries Inc. · maker’s number CSN 625 · owners notified Sept. 4, 2015 · NHTSA page for the 2015 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  11. July 2, 2015 Terex Advance Front Discharge Concrete Utility and aerial 2015 Equipment 120 units 15V423000

    Defect

    Terex Advance (Terex) is recalling certain model year 2015 Front Discharge Concrete Mixer Trucks manufactured April 1, 2015, to June 23, 2015. In the affected trucks, the bolts that secure the concrete mixing drum to the drum drive plate may not have been properly tightened.

    Consequence

    If the bolts are not properly tightened, the drum may separate from the vehicle, increasing the risk of injury or a crash.

    Remedy

    Terex will notify owners, and dealers will install new bolts using a thread locker, after removing the paint from under the fasteners. These repairs will be done free of charge. The recall began on Sptember 23, 2015. Owners may contact Terex customer service at 1-800-433-6691.

    Terex Advance · owners notified Sept. 23, 2015 · NHTSA page for the 2015 Terex Advance Front Discharge Concrete ↗

  12. June 23, 2015 Altec AH125, AH150, HL125 Utility and aerial 2013–2015 Equipment: mechanical 23 units 15V398000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2013-2015 Altec AH125, HL125 and AH150 aerial devices manufactured January 7, 2013, to January 2, 2015. In the affected vehicles, the rotation bearing fasteners may fail.

    Consequence

    If the fasteners that attach the aerial device to the truck fail, the boom may unintentionally move, increasing the risk of personal injury or death to the aerial device user or those nearby.

    Remedy

    Altec will notify owners and instruct users to complete their annual torque inspection. Any bolts that break during the inspection will be replaced, free of charge. The recall began on July 22, 2015. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 620.

    Altec Industries Inc. · maker’s number CSN 620 · owners notified July 22, 2015 · NHTSA page for the 2015 Altec AH125 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  13. March 23, 2015 Terex Aerial Devices, Digger Derrick Utility and aerial 2014–2015 Equipment 97 units 15V163000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2014-2015 Aerial Devices and General Digger Derricks manufactured March 28, 2014, to March 1, 2015. In the affected vehicles, the fasteners that attach the turntable bearing to the carrier and the aerial or the digger derrick may fail.

    Consequence

    If the attaching bolts fail, the boom may fall, increasing the risk of injury to the operator or those nearby.

    Remedy

    Terex will notify owners, and dealers will check the affected bolts, replacing them as necessary, free of charge. The recall begin on March 27, 2015. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN616.

    Terex South Dakota, Inc. · maker’s number SN616 · owners notified March 27, 2015 · NHTSA page for the 2015 Terex Digger Derrick ↗

  14. March 16, 2015 Altec Aerial Device Utility and aerial 2014 Equipment: mechanical 120 units 15V150000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2014 Aerial Devices manufactured April 1, 2014, to July 18, 2014, and equipped with certain SUN Hydraulics Corporation counterbalance valves. In the affected vehicles, the counterbalance valve may crack, allowing hydraulic fluid to leak, and possibly result in boom movement.

    Consequence

    Unintended boom movement of the aerial device increases the operator's risk of injury.

    Remedy

    Altec will notify owners, and dealers will replace the counterbalance valves, free of charge. The recall began on May 12, 2015. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 614.

    Altec Industries Inc. · maker’s number CSN 614 · owners notified May 12, 2015 · NHTSA page for the 2014 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  15. Feb. 23, 2015 Altec Aerial Device, Digger Derrick Utility and aerial 2012–2014 Electrical system 5,142 units 15V101000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2012-2014 Digger Derrick and Aerial Device vehicles manufactured October 1, 2012, to June 30, 2014, and mounted on Freightliner chassis. In the event of a short circuit condition, the 30 amp breaker to the trailer relay module may react too slowly to prevent the module from overheating.

    Consequence

    If the module overheats, there is an increased risk of a fire.

    Remedy

    Altec will notify owners, and dealers will replace the 30 amp circuit breaker with a 20 amp one, free of charge. The recall began on April 17, 2015. Owners may contact Altec customer service at 1-800-860-0183. Altec's number for this recall is CSN 612.

    Altec Industries Inc. · maker’s number CSN 612 · owners notified April 17, 2015 · NHTSA page for the 2014 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  16. Feb. 19, 2015 Altec Aerial Device Utility and aerial 2011–2014 Equipment 3,889 units 15V096000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain model year 2011-2014 Aerial Devices, models L36A, LRV, and LR7, manufactured June 1, 2011, to September 30, 2014, and built with Texas Hydraulics upper boom drive cylinders. In the affected aerial devices, the cylinder base end lug casting may develop cracks.

    Consequence

    If the cylinder lug castings crack, they may fail, resulting in unintended movement of the boom, increasing the risk of personal injury or death to the aerial device user or those nearby.

    Remedy

    Altec will notify owners, and dealers will inspect the cylinders for specific casting suspect lots. If both upper boom drive cylinders are not of the suspect lots, no further action is required. If a cylinder is found to be of one of the suspect lots, it will be inspected for visible cracks. If cracks are found the unit should be removed from service immediately and the cylinder will be replaced. If no cracks are found, the unit will be scheduled for magnetic particle inspection of the cylinder lug within 60 days. All of these actions will be performed free of charge. The recall began on April 6, 2015. Owners may contact Altec customer service at 1-800-860-0183. Altec's number for this recall is CSN 611.

    Altec Industries Inc. · maker’s number CSN 611 · owners notified April 6, 2015 · NHTSA page for the 2014 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  17. Feb. 6, 2015 Altec Crane Telescopic Jib Utility and aerial 2005–2013 Equipment 724 units 15V070000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2005-2013 Altec Crane Telescopic Jib's manufactured March 1, 2005, to August 30, 2013. There may be un-impeded movement of the telescopic jib if the limiting pin is not inserted in the correct position.

    Consequence

    The un-impeded movement of the jib may increase the risk of injury to the operator or those nearby.

    Remedy

    Altec will notify owners, and dealers will install a retrofit kit that will aid the operator in the proper placement of the pin, free of charge. The recall began on March 10, 2015. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 610.

    Altec Industries Inc. · maker’s number CSN 610 · owners notified March 10, 2015 · NHTSA page for the 2013 Altec Crane Telescopic Jib ↗

    Related on MPF: Altec Industries in the Solutions Guide

  18. Feb. 3, 2015 Terex Hi-Ranger Utility and aerial 2013 Equipment 305 units 15V058000

    Defect

    Terex South Dakota, Inc. (Terex) is recalling certain model year 2013 Hi-Ranger HR, HRX, TC, TCX, OM, and TLM trucks manufactured July 12, 2013, to December 26, 2013. On the affected vehicles, due to a problem with the bearing installation, the platform rotate cylinder can separate from the brackets and allow the platform to rotate without operator control.

    Consequence

    If the platform rotates without operator control, there is an increased risk of injury.

    Remedy

    Terex will notify owners, and dealers will replace the cylinder, free of charge. The recall began Feburary 17, 2015. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN614.

    Terex South Dakota, Inc. · maker’s number SN614 · owners notified Feb. 17, 2015 · NHTSA page for the 2013 Terex Hi-Ranger ↗

  19. Dec. 16, 2014 Terex Advance Front Discharge Concrete Utility and aerial 2013–2015 Suspension: front: springs: leaf spring assembly 553 units 14V793000

    Defect

    Terex Advance (Terex) is recalling certain model year 2013-2015 Front Discharge Concrete Mixer Trucks manufactured August 20, 2012, to December 5, 2014. Due to improperly secured castellated retaining nuts on the front axle leaf spring rear pin and the steering system, the rear end of the front axle leaf spring may partially disconnect from the front suspension hanger.

    Consequence

    If the front axle spring becomes partially disconnected from the front suspension hanger, steering difficulty may result, increasing the risk of a crash.

    Remedy

    Terex will notify owners, and dealers will inspect and correct the retaining nut installation, as necessary, free of charge. The recall began on May 15, 2015. Owners may contact Terex customer service at 1-800-433-6691.

    Terex Advance · owners notified May 15, 2015 · NHTSA page for the 2015 Terex Advance Front Discharge Concrete ↗

  20. Nov. 21, 2014 Terex Light Tower AL5 Utility and aerial 2014 Fuel system, diesel 84 units 14V746000

    Defect

    Terex Aerial Work Platforms (Terex) is recalling certain model year 2014 Light Tower AL5 work platforms manufactured October 16, 2013, to June 11, 2014. The affected work platforms have insufficient structural support for the lower section of the 60 gallon fuel tank. This reduced support can cause the fuel tank to become deformed and contact the trailer axle.

    Consequence

    A deformed fuel tank making contact with the trailer axle could increase the risk of a vehicle fire.

    Remedy

    Terex will notify owners, and dealers will add structural support to the lower part of the fuel tank, free of charge. The recall began on December 18, 2014. The structural support remedy will be available starting December 29, 2014. Owners may contact Terex customer service at 1-800-536-1800. Terex's number for this recall is SN 140016.

    Terex Aerial Work Platforms · maker’s number SN 140016 · owners notified Dec. 18, 2014 · NHTSA page for the 2014 Terex Light Tower AL5 ↗

  21. Nov. 21, 2014 Altec Aerial Device Utility and aerial 1999–2014 Equipment 1,907 units 14V745000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 1999-2014 aerial devices models A65, A70, A75, A72-, A/77-T, A82-T, A72-TE88, and A77-TE93 manufactured January 1, 1999, to July 15, 2014. The affected aerial devices may have an improperly set hydraulic pressure transducer which relieves excessive backpressure in the hydraulic tank circuit.

    Consequence

    In cooler temperatures, the improperly set hydraulic pressure transducer may result in inadvertent boom movement, increasing the risk of injury to the occupant or those nearby.

    Remedy

    Altec will notify owners, and dealers will replace and install a pressure switch, free of charge. The recall began in January 16, 2015. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 609.

    Altec Industries Inc. · maker’s number CSN 609 · owners notified Jan. 16, 2015 · NHTSA page for the 2014 Altec Aerial Device ↗

    Related on MPF: Altec Industries in the Solutions Guide

  22. Oct. 3, 2014 Altec Novae ST81181TPL2-B-140 Utility and aerial 2009–2012 Equipment 344 units 14V616000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2009-2012 Novae Sure-Trac ST81181TPL2-B-140 equipment trailers built August 31, 2009, to September 27, 2012, and manufactured with 3/16 inch thick steel tubing. The tongue of the affected trailers may crack and separate from the trailer frame.

    Consequence

    If the trailer tongue fails, a loss of control of the trailer or a separation of the trailer from the tow vehicle may occur, increasing the risk of a crash.

    Remedy

    Altec will notify owners, and dealers will inspect and repair any cracks found and add a reinforcing kit, free of charge. The recall begin on November 13, 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for the recall is CSN 605.

    Altec Industries Inc. · maker’s number CSN 605 · owners notified Nov. 13, 2014 · NHTSA page for the 2012 Altec Novae ST81181TPL2-B-140 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  23. Sept. 26, 2014 Altec DC1317 Utility and aerial 2011–2014 Equipment 813 units 14V601000

    Defect

    Altec Industries Inc. (Altec) is recalling certain model year 2011-2014 DC1317 wood chippers manufactured September 1, 2011, to July 14, 2014. In the affected vehicles, the fasteners that attach the chipper cutting disc bearing to the unit may fail and the chipper disc may detach.

    Consequence

    If the disc detaches within the housing, there is an increased risk of injury to the operator or those nearby.

    Remedy

    Altec has notified owners, and dealers will replace the disc bearing mounting bolts, free of charge. The recall began on October 29, 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 604.

    Altec Industries Inc. · maker’s number CSN 604 · owners notified Oct. 29, 2014 · NHTSA page for the 2014 Altec DC1317 ↗

    Related on MPF: Altec Industries in the Solutions Guide

  24. Aug. 15, 2014 Altec Aerial Device, Digger Derrick Utility and aerial 2000–2013 Electrical system: 12v/24v/48v battery 51 units 14V503000

    Defect

    Altec Industries, Inc. (Altec) is recalling certain model year 2000-2013 Aerial Device and Digger Derrick trucks, equipped with Sure Power Battery Equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.

    Consequence

    Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.

    Remedy

    Altec will notify owners, and dealers will replace any affected battery equalizer, free of charge. The recall is expected to begin in September 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 603.

    Altec Industries Inc. · maker’s number CSN 603 · owners notified Oct. 15, 2014 · NHTSA page for the 2013 Altec Digger Derrick ↗

    Related on MPF: Altec Industries in the Solutions Guide

  25. July 29, 2014 Altec D2000, D3000 Utility and aerial 2010–2012 Equipment: mechanical: winch 67 units 14V461000

    Defect

    Altec Industries, Inc (Altec) is recalling certain model year 2010-2012 D2000 and D3000 boom tip winch digger derricks, equipped with winch units manufactured by Tulsa Winch Group (formerly Gear Products). The winch drum on the affected vehicles may deform or fracture.

    Consequence

    A fracture of the winch drum increases the risk of personal injury.

    Remedy

    Altec will notify owners and dealers will inspect and replace the winch drum if necessary, free of charge. The recall is expected to begin in September 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 602.

    Altec Industries Inc. · maker’s number CSN 602 · owners notified Aug. 11, 2014 · NHTSA page for the 2012 Altec D3000 ↗

    Related on MPF: Altec Industries in the Solutions Guide

Recall details are NHTSA’s and CPSC’s own text. Fleet classes are MPF’s grouping of NHTSA makes and models; police variants are often filed under the civilian model name, so also search the civilian model. Check every vehicle by VIN at nhtsa.gov/recalls.